Hide Table of Contents

Walk-through PropertyManager

You create new walk-throughs or play back saved ones in the Walk-through PropertyManager.

To open this PropertyManager:

Click View > Lights and Cameras > Add Walk-through.

Start Walk-through Opens the control panel. Use tools on the control panel to control the direction and speed of travel and the viewing direction as you move the avatar through the model.

Recording

Available after you record a walk-through.

animate_play.png Button Play Recording Plays back the recording of the walk-through.
PM_generate_video.gif Generate Video Saves a video of the walk-through.

Viewport Settings

vector.png Vertical direction Defines the up direction. Select a linear curve, plane, or planar face. A green arrow indicates the direction. Click Flip Direction to reverse the direction.
dim_lin_vert_max.png Viewing height Sets the height above the floor or motion path at which the avatar is positioned.

Motion Constraints

Curves, planes, and planar faces to define floors and motion paths Defines constraints to limit motion through the system. You can define none, one, or several constraints. Select 2D or 3D sketches, grid features, reference planes, planar faces, or model edges. Click Move Up PM_move_up.gif and Move Down PM_move_down.gif to arrange the constraints.
  Turn avatar to follow paths Turns the avatar to face the direction of travel. Clear the option to keep the avatar facing the direction it was turned toward. You can, for instance, move the avatar forward and have it record objects on one side of the path.
  Treat faces as infinite planes Allows the avatar to move beyond the edges of any face to which it is constrained.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Walk-through PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.