Create Holes Using Hole Wizard and Sketch Points Example (C#)

//---------------------------------------------------------------------------
// Problem:
// When adding a number of Hole Wizard hole features,
// it is often helpful to use a sketch with a number of
// sketch points. However, IFeatureManager::HoleWizard
// requires selection points to be on a face and in the
// space of the model.
//
// This example shows how to transform a sketch point
// from the space of a sketch to the space of the model.
//
// Preconditions:
// 1. Open a part or assembly document.
// 2. Fully resolve the assembly.
// 3. Select a sketch with at least one sketch point.
//
// Postconditions:
// 1. Inserts counterbore hole features at each sketch point.
// 2. Inspect the Immediate window.
//
// NOTES:
// 1. Hole creation can fail due to geometry conditions.
// 2. To access:
//    * IWizardHoleFeatureData2::Face
//    * IWizardHoleFeatureData2::Vertex
//    * IWizardHoleFeatureData2::GetEndConditionReference
//    the feature must be rolled back with a call to
//    IWizardHoleFeatureData2::AccessSelections
//    because these are geometric entities that
//    can be consumed by subsequent features.
//---------------------------------------------------------------------------
using Microsoft.VisualBasic;
using System;
using System.Collections;
using System.Collections.Generic;
using System.Data;
using System.Diagnostics;
using SolidWorks.Interop.sldworks;
using SolidWorks.Interop.swconst;
using System.Runtime.InteropServices;
namespace WizardHoleFeatureData_CSharp.csproj
{
    partial class SolidWorksMacro
    {

        public bool CreateHoleWizardFeature(SldWorks swApp, ModelDoc2 swModel)
        {
            bool functionReturnValue = false;

            FeatureManager swFeatMgr = default(FeatureManager);
            Feature swFeat = default(Feature);
            WizardHoleFeatureData2 swWizHole = default(WizardHoleFeatureData2);

            swFeatMgr = swModel.FeatureManager;
            swFeat = swFeatMgr.HoleWizard((int)swWzdGeneralHoleTypes_e.swWzdCounterBore, (int)swWzdHoleStandards_e.swStandardISO, (int)swWzdHoleStandardFastenerTypes_e.swStandardISOHexCapScrew, "M6", (int)swWzdHoleThreadEndCondition_e.swEndThreadTypeBLIND, 0.0066, 0.02, 0.014547, 0.004, 0.0,
            1.0, 2.059488517353, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0);


            // Hole creation can fail due to geometry conditions
            if (swFeat == null)
            {
                functionReturnValue = false;
                return functionReturnValue;
            }

            swWizHole = (WizardHoleFeatureData2)swFeat.GetDefinition();

            Debug.Print("Feature = " + swFeat.Name);
            Debug.Print("  Type                         = " + swWizHole.Type);
            Debug.Print("");
            Debug.Print("  CosmeticThreadType           = " + swWizHole.CosmeticThreadType);
            Debug.Print("  CounterBoreDepth             = " + swWizHole.CounterBoreDepth * 1000.0 + " mm");
            Debug.Print("  CounterBoreDiameter          = " + swWizHole.CounterBoreDiameter * 1000.0 + " mm");
            //1 radian = 180º/p = 57.295779513º or approximately 57.3º
            Debug.Print("  CounterDrillAngle            = " + swWizHole.CounterDrillAngle * 57.3 + " deg");
            Debug.Print("  CounterDrillDepth            = " + swWizHole.CounterDrillDepth * 1000.0 + " mm");
            Debug.Print("  CounterDrillDiameter         = " + swWizHole.CounterDrillDiameter * 1000.0 + " mm");
            Debug.Print("  CounterSinkAngle             = " + swWizHole.CounterSinkAngle * 57.3 + " deg");
            Debug.Print("  CounterSinkDiameter          = " + swWizHole.CounterSinkDiameter * 1000.0 + " mm");
            Debug.Print("  Depth                        = " + swWizHole.Depth * 1000.0 + " mm");
            Debug.Print("  Diameter                     = " + swWizHole.Diameter * 1000.0 + " mm");
            Debug.Print("  DrillAngle                   = " + swWizHole.DrillAngle * 57.3 + " deg");
            Debug.Print("  EndCondition                 = " + swWizHole.EndCondition);
            Debug.Print("  FarCounterSinkAngle          = " + swWizHole.FarCounterSinkAngle * 57.3 + " deg");
            Debug.Print("  FarCounterSinkDiameter       = " + swWizHole.FarCounterSinkDiameter * 1000.0 + " mm");
            Debug.Print("  FastenerSize                 = " + swWizHole.FastenerSize);
            Debug.Print("  FastenerType                 = " + swWizHole.FastenerType2);
            Debug.Print("  HeadClearance                = " + swWizHole.HeadClearance * 1000.0 + " mm");
            Debug.Print("  HeadClearanceType            = " + swWizHole.HeadClearanceType);
            Debug.Print("  HoleDepth                    = " + swWizHole.HoleDepth * 1000.0 + " mm");
            Debug.Print("  HoleDiameter                 = " + swWizHole.HoleDiameter * 1000.0 + " mm");
            Debug.Print("  MajorDiameter                = " + swWizHole.MajorDiameter * 1000.0 + " mm");
            Debug.Print("  MidCounterSinkAngle          = " + swWizHole.MidCounterSinkAngle * 57.3 + " deg");
            Debug.Print("  MidCounterSinkDiameter       = " + swWizHole.MidCounterSinkDiameter * 1000.0 + " mm");
            Debug.Print("  MinorDiameter                = " + swWizHole.MinorDiameter * 1000.0 + " mm");
            Debug.Print("  NearCounterSinkAngle         = " + swWizHole.NearCounterSinkAngle * 57.3 + " deg");
            Debug.Print("  NearCounterSinkDiameter      = " + swWizHole.NearCounterSinkDiameter * 1000.0 + " mm");
            Debug.Print("  Standard                     = " + swWizHole.Standard2);
            Debug.Print("  TapDrillDepth                = " + swWizHole.TapDrillDepth * 1000.0 + " mm");
            Debug.Print("  TapDrillDiameter             = " + swWizHole.TapDrillDiameter * 1000.0 + " mm");
            Debug.Print("  ThreadAngle                  = " + swWizHole.ThreadAngle * 57.3 + " deg");
            Debug.Print("  ThreadDepth                  = " + swWizHole.ThreadDepth * 1000.0 + " mm");
            Debug.Print("  ThreadDiameter               = " + swWizHole.ThreadDiameter * 1000.0 + " mm");
            Debug.Print("  ThruHoleDepth                = " + swWizHole.ThruHoleDepth * 1000.0 + " mm");
            Debug.Print("  ThruHoleDiameter             = " + swWizHole.ThruHoleDiameter * 1000.0 + " mm");
            Debug.Print("  ThruTapDrillDepth            = " + swWizHole.ThruTapDrillDepth * 1000.0 + " mm");
            Debug.Print("  ThruTapDrillDiameter         = " + swWizHole.ThruTapDrillDiameter * 1000.0 + " mm");

            functionReturnValue = true;
            return functionReturnValue;

        }

        public void Main()
        {
            MathUtility swMathUtil = default(MathUtility);
            ModelDoc2 swModel = default(ModelDoc2);
            SelectionMgr swSelMgr = default(SelectionMgr);
            Feature swFeat = default(Feature);
            Sketch swSketch = default(Sketch);
            object[] vSketchPtArr = null;
            object vSketchPt = null;
            SketchPoint swSketchPt = default(SketchPoint);
            MathTransform swSketchXform = default(MathTransform);
            object vPtArr = null;
            MathPoint swPt = default(MathPoint);
            bool bRet = false;
            double[] nPtData = new double[3];

            swMathUtil = (MathUtility)swApp.GetMathUtility();
            swModel = (ModelDoc2)swApp.ActiveDoc;
            swSelMgr = (SelectionMgr)swModel.SelectionManager;
            swFeat = (Feature)swSelMgr.GetSelectedObject6(1, -1);
            swSketch = (Sketch)swFeat.GetSpecificFeature2();
            swSketchXform = swSketch.ModelToSketchTransform;
            swSketchXform = (MathTransform)swSketchXform.Inverse();

            vSketchPtArr = (object[])swSketch.GetSketchPoints();


            foreach (object vSketchPt_loopVariable in vSketchPtArr)
            {
                vSketchPt = vSketchPt_loopVariable;
                swSketchPt = (SketchPoint)vSketchPt;
                nPtData[0] = swSketchPt.X;
                nPtData[1] = swSketchPt.Y;
                nPtData[2] = swSketchPt.Z;
                vPtArr = nPtData;

                swPt = (MathPoint)swMathUtil.CreatePoint(vPtArr);
                swPt = (MathPoint)swPt.MultiplyTransform(swSketchXform);

                bRet = swModel.Extension.SelectByID2("", "FACE", ((double[])swPt.ArrayData)[0], ((double[])swPt.ArrayData)[1], ((double[])swPt.ArrayData)[2], true, 0, null, 0);
                bRet = CreateHoleWizardFeature(swApp, swModel);

            }
        }

        public SldWorks swApp;

    }


}