Hide Table of Contents

Get Guide Curves in Sweep Feature Example (VBA)

This example shows how to get the guide curves in a sweep feature.

'----------------------------------------
' Preconditions: 
' 1. Verify that the specified part document 
'    template exists.
' 2. Open the Immediate window.
'
' Postconditions:
' 1. Creates a new part document.
' 2. Creates a sweep feature.
' 3. Prints to the Immediate window the
'    number of guide curves in the sweep
'    feature.
' 4. Accesses the guide curves in the sweep feature.
' 5. Prints to the Immediate window the feature types
'    of the guide curves.
' 6. Releases access to the sweep feature.
' 7. Examine the Immediate window.
'----------------------------------------
Option Explicit
Dim swApp As SldWorks.SldWorks
Dim swModel As SldWorks.ModelDoc2
Dim swModelDocExt As SldWorks.ModelDocExtension
Dim swSketchMgr As SldWorks.SketchManager
Dim swSketchSegment As SldWorks.SketchSegment
Dim swFeature As SldWorks.Feature
Dim swFeatureMgr As SldWorks.FeatureManager
Dim swSweepFeatureData As SldWorks.SweepFeatureData
Dim pointArray As Variant
Dim points() As Double
Dim guideCurves As Variant
Dim guideCurve As Object
Dim nbrGuideCurves As Long
Dim status As Boolean
Dim i As Long
Sub main()
    Set swApp = Application.SldWorks    
    'Create new model document
    Set swModel = swApp.NewDocument("C:\ProgramData\SolidWorks\SolidWorks 2015\templates\Part.prtdot", 0, 0, 0)
    Set swModelDocExt = swModel.Extension    
    'Sketch an ellipse for sweep profile
    swModel.ClearSelection2 True
    Set swSketchMgr = swModel.SketchManager
    status = swModelDocExt.SelectByID2("Top Plane", "PLANE", 0, 0, 0, False, 0, Nothing, 0)
    swSketchMgr.InsertSketch True
    Set swSketchSegment = swSketchMgr.CreateEllipse(0, 0, 0, -0.064925207354862, 0, 0, 0, -3.60377802938881E-02, 0)
    swModel.ClearSelection2 True
    swSketchMgr.InsertSketch True       
    'Sketch a line for sweep path
    status = swModelDocExt.SelectByID2("Front Plane", "PLANE", 0, 0, 0, False, 0, Nothing, 0)
    swSketchMgr.InsertSketch True
    Set swSketchSegment = swSketchMgr.CreateLine(0#, 0#, 0#, 0#, 0.059816, 0#)
    swModel.ClearSelection2 True
    swSketchMgr.InsertSketch True    
    'Sketch a spline for sweep guide curve
    status = swModelDocExt.SelectByID2("Front Plane", "PLANE", 0, 0, 0, False, 0, Nothing, 0)
    swSketchMgr.InsertSketch True    
    ReDim points(0 To 5) As Double
    points(0) = -0.064925207354862
    points(1) = 0
    points(2) = 0
    points(3) = -5.76005360247873E-03
    points(4) = 5.95205538922803E-02
    points(5) = 0
    pointArray = points
    Set swSketchSegment = swSketchMgr.CreateSpline((pointArray))
    swModel.ClearSelection2 True    
    status = swModelDocExt.SelectByID2("Unknown", "MANIPULATOR", -4.81685228359519E-02, 1.68573405240843E-02, 0, False, 0, Nothing, 0)
    swModel.ClearSelection2 True
    swSketchMgr.InsertSketch True
    swModel.ViewZoomtofit2    
    'Select the profile, path, and guide curve
    status = swModelDocExt.SelectByID2("Sketch1", "SKETCH", 0, 0, 0, True, 0, Nothing, 0)
    status = swModelDocExt.SelectByID2("Sketch2", "SKETCH", 0, 0, 0, True, 0, Nothing, 0)
    status = swModelDocExt.SelectByID2("Sketch3", "SKETCH", 0, 0, 0, True, 0, Nothing, 0)
    swModel.ClearSelection2 True    
    status = swModelDocExt.SelectByID2("Sketch1", "SKETCH", 0, 0, 0, False, 1, Nothing, 0)
    status = swModelDocExt.SelectByID2("Sketch2", "SKETCH", 0, 0, 0, True, 4, Nothing, 0)
    status = swModelDocExt.SelectByID2("Sketch3", "SKETCH", 0, 0, 0, True, 2, Nothing, 0)    
    'Create the sweep feature
    Set swFeatureMgr = swModel.FeatureManager
    Set swFeature = swFeatureMgr.InsertProtrusionSwept3(False, False, swTwistControlType_e.swTwistControlFollowPath, False, False, swTangencyType_e.swTangencyNone, swTangencyType_e.swTangencyNone, False, 0, 0, swThinWallType_e.swThinWallOneDirection, 0, True, True, True, 0, True)
    Debug.Print "Feature type: " & swFeature.GetTypeName2
    'Change the orientation of the view
    swModel.ShowNamedView2 "*Isometric", 7    
    'Access sweep feature data, get guide curves,
    'get feature type of guide curves, and release
    'access to sweep feature
    Set swSweepFeatureData = swFeature.GetDefinition
    nbrGuideCurves = swSweepFeatureData.GetGuideCurvesCount
    Debug.Print ("  Number of guide curves: " & nbrGuideCurves)
    status = swSweepFeatureData.AccessSelections(swModel, Nothing)
    Debug.Print ("    Guide curve: ")
    guideCurves = swSweepFeatureData.guideCurves
    For i = 0 To (nbrGuideCurves - 1)
        Set guideCurve = guideCurves(i)
        Debug.Print ("      Type of feature: " & swSweepFeatureData.GetGuideCurvesType(i))
    Next i
    swSweepFeatureData.ReleaseSelectionAccess    
End Sub


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Get Guide Curves in Sweep Feature Example (VBA)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.