Hide Table of Contents
FeatureCutThin Method (IFeatureManager)

Obsolete. Superseded by IFeatureManager::FeatureCutThin2.

.NET Syntax

Visual Basic (Declaration) 
Function FeatureCutThin( _
   ByVal Sd As System.Boolean, _
   ByVal Flip As System.Boolean, _
   ByVal Dir As System.Boolean, _
   ByVal T1 As System.Integer, _
   ByVal T2 As System.Integer, _
   ByVal D1 As System.Double, _
   ByVal D2 As System.Double, _
   ByVal Dchk1 As System.Boolean, _
   ByVal Dchk2 As System.Boolean, _
   ByVal Ddir1 As System.Boolean, _
   ByVal Ddir2 As System.Boolean, _
   ByVal Dang1 As System.Double, _
   ByVal Dang2 As System.Double, _
   ByVal OffsetReverse1 As System.Boolean, _
   ByVal OffsetReverse2 As System.Boolean, _
   ByVal TranslateSurface1 As System.Boolean, _
   ByVal TranslateSurface2 As System.Boolean, _
   ByVal Thk1 As System.Double, _
   ByVal Thk2 As System.Double, _
   ByVal EndThk As System.Double, _
   ByVal RevThinDir As System.Integer, _
   ByVal CapEnds As System.Integer, _
   ByVal AddBends As System.Boolean, _
   ByVal BendRad As System.Double, _
   ByVal UseFeatScope As System.Boolean, _
   ByVal UseAutoSelect As System.Boolean _
) As Feature
Visual Basic (Usage) 
Dim instance As IFeatureManager
Dim Sd As System.Boolean
Dim Flip As System.Boolean
Dim Dir As System.Boolean
Dim T1 As System.Integer
Dim T2 As System.Integer
Dim D1 As System.Double
Dim D2 As System.Double
Dim Dchk1 As System.Boolean
Dim Dchk2 As System.Boolean
Dim Ddir1 As System.Boolean
Dim Ddir2 As System.Boolean
Dim Dang1 As System.Double
Dim Dang2 As System.Double
Dim OffsetReverse1 As System.Boolean
Dim OffsetReverse2 As System.Boolean
Dim TranslateSurface1 As System.Boolean
Dim TranslateSurface2 As System.Boolean
Dim Thk1 As System.Double
Dim Thk2 As System.Double
Dim EndThk As System.Double
Dim RevThinDir As System.Integer
Dim CapEnds As System.Integer
Dim AddBends As System.Boolean
Dim BendRad As System.Double
Dim UseFeatScope As System.Boolean
Dim UseAutoSelect As System.Boolean
Dim value As Feature
 
value = instance.FeatureCutThin(Sd, Flip, Dir, T1, T2, D1, D2, Dchk1, Dchk2, Ddir1, Ddir2, Dang1, Dang2, OffsetReverse1, OffsetReverse2, TranslateSurface1, TranslateSurface2, Thk1, Thk2, EndThk, RevThinDir, CapEnds, AddBends, BendRad, UseFeatScope, UseAutoSelect)
C# 
Feature FeatureCutThin( 
   System.bool Sd,
   System.bool Flip,
   System.bool Dir,
   System.int T1,
   System.int T2,
   System.double D1,
   System.double D2,
   System.bool Dchk1,
   System.bool Dchk2,
   System.bool Ddir1,
   System.bool Ddir2,
   System.double Dang1,
   System.double Dang2,
   System.bool OffsetReverse1,
   System.bool OffsetReverse2,
   System.bool TranslateSurface1,
   System.bool TranslateSurface2,
   System.double Thk1,
   System.double Thk2,
   System.double EndThk,
   System.int RevThinDir,
   System.int CapEnds,
   System.bool AddBends,
   System.double BendRad,
   System.bool UseFeatScope,
   System.bool UseAutoSelect
)
C++/CLI 
Feature^ FeatureCutThin( 
&   System.bool Sd,
&   System.bool Flip,
&   System.bool Dir,
&   System.int T1,
&   System.int T2,
&   System.double D1,
&   System.double D2,
&   System.bool Dchk1,
&   System.bool Dchk2,
&   System.bool Ddir1,
&   System.bool Ddir2,
&   System.double Dang1,
&   System.double Dang2,
&   System.bool OffsetReverse1,
&   System.bool OffsetReverse2,
&   System.bool TranslateSurface1,
&   System.bool TranslateSurface2,
&   System.double Thk1,
&   System.double Thk2,
&   System.double EndThk,
&   System.int RevThinDir,
&   System.int CapEnds,
&   System.bool AddBends,
&   System.double BendRad,
&   System.bool UseFeatScope,
&   System.bool UseAutoSelect
) 

Parameters

Sd
True for single ended, false for double ended
Flip

Flip side to cut; true to remove material outside of the profile, false to not

Dir

Reverse direction; true if you want Direction1 to be opposite the default direction (see Remarks)

T1
Termination type for first end as defined in swEndConditions_e
T2
Termination type for second end as defined in swEndConditions_e
D1
Depth of extrusion for first end in meters
D2
Depth of extrusion for second end in meters
Dchk1
True allows draft angle in first direction, false does not allow drafting
Dchk2
True allows draft angle in second direction, false does not allow drafting
Ddir1
True for first draft angle to be inward, false to be outward
Ddir2
True for second draft angle to be inward, false to be outward
Dang1
First draft angle
Dang2
Second draft angle
OffsetReverse1
If you chose to offset the first end condition from another face or plane, then true specifies offset in direction away from the sketch, false specifies offset from the face or plane in direction toward the sketch
OffsetReverse2

If you chose to offset the second end condition from another face or plane, then true specifies offset in direction away from the sketch, false specifies offset from the face or plane in direction toward the sketch

TranslateSurface1

When you choose swEndcondOffsetFromSurface as the termination type for the first end, then true specifies that the end of the extrusion is a translation of the reference surface, false specifies to use a true offset

TranslateSurface2

When you choose swEndcondOffsetFromSurface as the termination type for the second end, then true specifies that the end of the extrusion is a translation of the reference surface, false specifies to use a true offset

Thk1

Wall thickness 1 (Mid-plane type uses (Thk1)/2 for each direction)

Thk2

Wall thickness 2 (only used when RevThinDir=3 )

EndThk
End cap thickness (Only used when CapEnds=1)
RevThinDir

Thin feature type:

  • 0 = One direction

  • 1 = One direction reverse

  • 2 = Mid-plane

  • 3 = Two direction

CapEnds

Cap the ends:

  • 0 = no cap

  • 1 = cap (base features only)

AddBends

True to add auto bends (open profile base features only), false to not

BendRad

Fillet radii if AddBends = True

UseFeatScope

True if the feature only affects selected bodies, false if the feature affects all bodies

UseAutoSelect

True to automatically select all bodies and have the feature affect those bodies, false to select the bodies the feature affects (see Remarks)

Return Value

Pointer to the IFeature object

Remarks

The default direction for cut operations is opposite the sketch normal. The default direction for boss operations is along the sketch normal. Setting the Dir argument to True reverses the default direction. For double-ended extrusions, Direction 2 is always opposite of Direction 1.

The default sketch normal is the same as the face or plane normal where the sketch was placed. To determine this normal vector, see IFace2::Normal and IRefPlane::Transform, respectively.

When UseAutoSelect is false, the user must select the bodies that the feature will affect.

When using cut or cavity features that result in multiple bodies, you cannot select to keep all of the resulting bodies or one or more selected bodies.

 

See Also

Availability

SOLIDWORKS 2003 FCS, Revision Number 11.0


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   FeatureCutThin Method (IFeatureManager)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.