Hide Table of Contents

Bill of Materials Tab - Weldment Cut List or Weldment BOM

Use the Bill of Materials tab to view a cut list or weldment BOM for a weldment part.

A weldment BOM lists the components and total component length for the weldment part. A cut list contains the cut lengths and quantities for each component.

You cannot modify a cut list or a weldment BOM and you cannot save them as named BOMs. You can open a cut list or a weldment BOM as a .csv file.

To view a cut list or weldment BOM:

Select a multibody part. On the Bill of Materials tab, for BOM, select Weldment Cut List or Weldment BOM .

The Bill of Materials toolbar layout for both weldment BOMs and weldment cut lists is the same:

BOM_UI_Weldment_cutlist

View

Bill of Materials The selected BOM type, either Weldment Cut List or Weldment BOM .

File

Source (Read-only) The weldment part file name.
File Version The version of the file.
Configuration A configuration name.

Commands

These commands are available for both weldment cut lists and weldment BOMs.
BOM_UI_Open_as_CSV_file Open As CSV Open the BOM in Excel as a comma-delimited file.
Search Search the BOM for a text string.
Compare Changes the Bill of Materials tab layout so that you can select a second BOM to compare.
Help Access context-sensitive help.

BOM Table Properties

The columns and formatting of weldment cutlists and weldment BOMs are defined in BOM templates created by SOLIDWORKS PDM administrators.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Bill of Materials Tab - Weldment Cut List or Weldment BOM
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS PDM 2017 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.59