Fillet Bead PropertyManager

To open the Fillet Bead PropertyManager:

Click Fillet Bead Tool_Fillet_Bead_Weldment.gif (Weldments toolbar) or Insert > Weldments > Fillet Bead.

Arrow Side

  Bead type
weldments_bead_full.gif weldments_bead_intermittent.gif
Full length Intermittent
weldments_bead_staggered01.gif weldments_bead_staggered02.gif
Staggered - Arrow Side Staggered - Other Side
PM_direction1_thck.gif Fillet size Length of the leg of the fillet bead.
  Bead length (For Intermittent or Staggered). Length of each bead segment.
  Pitch (For Intermittent or Staggered). Distance between the start of each bead.
  When you insert a bead across a gap:
weldments_bead_penetration_full.gif weldments_bead_penetration_partial.gif
Full penetration. Applies the bead to the full depth. Partial penetration. Applies the bead to the depth you enter in Penetration PM_thickness_3.gif.
  Tangent propagation
weldments_tangent_prop_selected.gif weldments_tangent_prop_cleared.gif
Selected Cleared
PM_face.gif Face Set1 Select one or more planar faces.
PM_face.gif Face Set2 Select one or more planar faces that intersect the first face set.
  Intersecting Edges Highlights edges where Face Set1 and Face Set2 intersect. You can right-click an edge and select Delete to remove it from the weld bead.

Other Side

Select Other Side to apply optional settings for Full Length and Intermittent types. If you selected Staggered as the Bead type, the Other Side is already displayed. Make selections as described for Arrow Side.