You can flip the tangency
direction of certain curved sketch entities. This includes arcs and splines.
To control the
tangency direction:
-
Open
system_dir:\Users\Public\Public
Documents\SOLIDWORKS\SOLIDWORKS
2018\samples\whatsnew\sketching\Block.sldprt.
-
In the FeatureManager design tree, under
Cut-Extrude1, right-click
Sketch3 and click Edit Sketch
.
-
In the graphics area, right-click the arc and click
Reverse Endpoint Tangent on the shortcut menu.
The software reverses the tangency and flips the arc.
-
Click .