Plotting Rigid Body Orientation You can plot the orientation of a moving part. From a Motion Analysis study, click Results and Plots (MotionManager toolbar). In the PropertyManager, for Category, select Other Quantities. For Subcategory and Select result component, select from the following: Subcategory Result Component Euler Angles Select one of the following:Psi Theta Phi Pitch/Yaw/Roll Select one of the following:Pitch Yaw Roll Bryant Angles Select one of the following:Angle 1 Angle 2 Angle 3 From a Motion Analysis study, click Results and Plots (MotionManager toolbar). In the PropertyManager, for Category, select Other Quantities. For features , select a part face to calculate the result for the rotational motion of the part. Select the Plot Results options you require, and click .The result appears in the MotionManager tree. Click Calculate (MotionManager toolbar). Parent topicOrientation, Reflected Load, and Other Plots Related concepts Yaw, Pitch, and Roll in Results Euler Angle Results Bryant Angle Results Reflected Load Inertia and Reflected Load Mass Related tasks Plotting Normalized Rodrigues Parameters Plotting Projection Angles for Rotating Parts