Hide Table of Contents
FeatureRevolveCut2 Method (IFeatureManager)

Obsolete. Superseded by IFeatureManager::FeatureRevolve2.

.NET Syntax

Visual Basic (Declaration) 
Function FeatureRevolveCut2( _
   ByVal Angle As System.Double, _
   ByVal ReverseDir As System.Boolean, _
   ByVal Angle2 As System.Double, _
   ByVal RevType As System.Integer, _
   ByVal Options As System.Integer, _
   ByVal UseFeatScope As System.Boolean, _
   ByVal UseAutoSelect As System.Boolean, _
   ByVal AssemblyFeatureScope As System.Boolean, _
   ByVal AutoSelectComponents As System.Boolean, _
   ByVal PropagateFeatureToParts As System.Boolean _
) As Feature
Visual Basic (Usage) 
Dim instance As IFeatureManager
Dim Angle As System.Double
Dim ReverseDir As System.Boolean
Dim Angle2 As System.Double
Dim RevType As System.Integer
Dim Options As System.Integer
Dim UseFeatScope As System.Boolean
Dim UseAutoSelect As System.Boolean
Dim AssemblyFeatureScope As System.Boolean
Dim AutoSelectComponents As System.Boolean
Dim PropagateFeatureToParts As System.Boolean
Dim value As Feature
value = instance.FeatureRevolveCut2(Angle, ReverseDir, Angle2, RevType, Options, UseFeatScope, UseAutoSelect, AssemblyFeatureScope, AutoSelectComponents, PropagateFeatureToParts)
Feature FeatureRevolveCut2( 
   System.double Angle,
   System.bool ReverseDir,
   System.double Angle2,
   System.int RevType,
   System.int Options,
   System.bool UseFeatScope,
   System.bool UseAutoSelect,
   System.bool AssemblyFeatureScope,
   System.bool AutoSelectComponents,
   System.bool PropagateFeatureToParts
Feature^ FeatureRevolveCut2( 
&   System.double Angle,
&   System.bool ReverseDir,
&   System.double Angle2,
&   System.int RevType,
&   System.int Options,
&   System.bool UseFeatScope,
&   System.bool UseAutoSelect,
&   System.bool AssemblyFeatureScope,
&   System.bool AutoSelectComponents,
&   System.bool PropagateFeatureToParts



Angle of revolution in radians


True reverses the angle direction, false does not


Angle of revolution in radians


Type of revolution as defined in swRevolveType_e (can be either mid-plane or two-direction)


Additional control (see Remarks)


True if the feature only affects selected bodies, false if the feature affects all bodies


True to automatically select all bodies and have the feature affect those bodies, false to select the bodies the feature affects (see Remarks)

True if the assembly feature only affects selected components in the assembly, false if the assembly feature affects all components in the assembly

True to auto-select all affected components, false to not (use the selected components)

True to propagate the assembly feature to the components, false to not

Return Value



The Options argument allows additional control of the feature creation.Supported value is swRevolveOptions_e.swAutoCloseSketch, which closes the sketch if it is open.When UseAutoSelect is false, the user must select the bodies that the feature will affect.

When using cut or cavity features that result in multiple bodies, you cannot select to keep all of the resulting bodies or one or more selected bodies.

For extruded feature cuts, see IFeatureManager::FeatureCut.


See Also


SOLIDWORKS 2009 FCS, Revision Number 17.0

Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

Subject:   Feedback on Help Topics
Page:   FeatureRevolveCut2 Method (IFeatureManager)
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:


We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again

Web Help Content Version: API Help (English only) 2018 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.