Hide Table of Contents

Setting the Active LineWeight

Use the LineWeight command to set the LineWeight for new entities. LineWeight defines how thick or thin entities appear.

The LineWeight of entities does not change when you zoom in or out. LineWeights are not meant to represent real world units. Use PolyLines to draw wide 2D entities that reflect real world units.

Note: You cannot assign LineWeights to Point entities, Text with TrueType font, Solid entities (2D solid fills), or raster image references.

To set the LineWeight:

  1. Click Format > Line Weight (or type LineWeight).

    In the Options dialog box, the Drafting Styles page opens and Line Weight expands.

  2. Select Inches or Millimeters as the units for the LineWeight.
  3. In Line weight, select a numeric value or select:
    • ByBlock: Sets the LineWeight for new entities to the default LineWeight until you include them in a Block.
    • ByLayer: Sets the LineWeight based on the LineWeight of the active layer. ByLayer lets you set different LineWeights for different layers.
    • Default: Sets the LineWeight to the Default weight. Entities created using the default LineWeight are adjusted if you change the Default weight (see below).
  4. In Default weight, select a default LineWeight for layers.
  5. Select Display weight in graphics area to view LineWeights.
  6. Set Scale to adjust the scale of the LineWeight.

Access

Command: LineWeight

Menu: Format > Line Weight



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Setting the Active LineWeight
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: 2019 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.