|
Insert Components |
Inserts components into an assembly. Available when you select
Edit Assembly.
|
|
Mate |
Creates mates between components and use geometry types as mate
references. Available when you select Edit
Assembly.
|
|
Add Walk-through |
Creates and saves videos of what you see as you maneuver
through the assembly. |
|
Measure |
Measures distance between
vertices, edges, and faces in the assembly. |
|
Section View |
Displays the model as if cut by planes that you specify. You can select one or more of the three standard planes to section the model. |
|
Take Snapshot |
Captures the state of the graphics area, similar to a custom
named view. Saves the state in a Snap feature on the DisplayManager tab of the Manager Pane.
Unlike a custom named view, if parts are hidden when you take a
snapshot, those parts are always hidden when you return to that
snapshot. |
|
Filter
Modified Components |
Adjusts the transparency of unchanged components. When
you enable Filter Modified
Components and then you edit and save a component in
a separate window, the changed component remains opaque in the
assembly window. The unchanged components become transparent. Filter
Modified Components is available only when one
or more components have been modified.
|
|
Show Hidden
Components |
Displays hidden components and hides shown components
in the graphics area. |
|
Selective Open |
Fully loads selected components. Other components are not
loaded and become hidden. The software exits Large Design
Review. |
|
Selective Open in Lightweight |
Loads selected components as lightweight. Other components are
not loaded and become hidden. The software exits Large Design
Review. |
|
Set All to Resolved |
Fully loads all components and exits Large Design Review. |
|
Set All to Lightweight |
Loads all components as lightweight and exits Large Design
Review. |
|
Performance Evaluation |
Reports assembly statistics like the number and type of
components, and the depth of the assembly hierarchy. Performance
Evaluation diagnostic tests are not available in Large Design
Review. |
|
Configurations |
Lists configurations that have the Display Data mark . To view, right-click in CommandManager and click
Configurations
.
|