Hide Table of Contents
This example constructs two lines and inserts an angular dimension between the lines in a DraftSight drawing.
  1. Start DraftSight.
  2. Using the following form, specify the text for the angular dimension in Dimension text:
  3. Specify where to place the lines:
    1. Select Coordinates.
    2. Type the x, y, and z coordinates for the start and end lines in First line start, First line end, Second line start, and Second line end.
    3. When prompted, type the x, y, and z coordinates for the angular dimension and click OK after each prompt.
    4. Click Insert.
      • - or -
    1. Select Points in drawing.
    2. Click Insert.
    3. When prompted, type the x, y, and z coordinates for the angular dimension and click OK after each prompt.
    4. Click anywhere in the drawing to insert the start and end points for the first and second lines.
  4. Examine the drawing.

NOTES:

  • If Dimension text is left blank, null is displayed.
  • The coordinates for the angular dimension are printed to Output. Errors are also printed to Output.
  • To recreate this example:
  1. Right-click the topic and select to view the source.
  2. Save the file as an HTML file.
  3. Open the HTML file in your web browser.
  4. If using Windows Internet Explorer and running scripts is blocked, click the Information bar near the top of the webpage and select Allow Blocked Content.

Dimension text:
 
Coordinates    
       First line start
             x:
             y:
             z:
       First line end
            x:
            y:
            z:
       Second line start
           x:
           y:
           z:
       Second line end
           x:
           y:
           z:
   
Points in drawing
 

Output


 




Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Insert Lines and Angular Dimension Example (JS)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2019 SP03

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.