Obsolete. Superseded by IFeatureManager::InsertRib.
.NET Syntax
Visual Basic (Usage) | |
---|
Dim instance As IModelDoc2
Dim Is2Sided As System.Boolean
Dim ReverseThicknessDir As System.Boolean
Dim Thickness As System.Double
Dim ReferenceEdgeIndex As System.Integer
Dim ReverseMaterialDir As System.Boolean
Dim IsDrafted As System.Boolean
Dim DraftOutward As System.Boolean
Dim DraftAngle As System.Double
Dim IsNormToSketch As System.Boolean
instance.InsertRib2(Is2Sided, ReverseThicknessDir, Thickness, ReferenceEdgeIndex, ReverseMaterialDir, IsDrafted, DraftOutward, DraftAngle, IsNormToSketch) |
Parameters
- Is2Sided
True if the rib is double-sided rib, false if the rib is single sided; a double-sided rib thickens on both sides of the sketch
- ReverseThicknessDir
For single-sided ribs, the direction thickened is the opposite side of the sketch normal
- Thickness
Rib thickness
- ReferenceEdgeIndex
Edge in the sketch to us to determine the material direction and for draft reference; when the rib is drafted, the mid point of this edge maintains the thickness value; other points on the rib may have a different thickness due to the draft
- ReverseMaterialDir
Which direction the rib has material; it is on one side or the order side of the reference edge base on this flag
- IsDrafted
True if the rib is drafted, false if not
- DraftOutward
True to draft outwards, false to not
- DraftAngle
Draft angle to apply to the rib
- IsNormToSketch
True if the rib is normal to the sketch, false if the rib is parallel to the sketch
Remarks
See Also
Availability
SOLIDWORKS 2001Plus FCS, Revision Number 10.0