Adds members defined by
sketch entities, points, reference planes, and surfaces.
To open the
Primary
Member PropertyManager:
- Click.
- Click Primary
Member.
Path Segment
Creates a member along a sketch entity. Select one or more sketch
entities (similar to weldments). You can also select model edges for path
segments.
Path
Segments |
Select path segments in
sketch. |
Ref Plane Member
Creates a member along the intersection of two or more planes.
Start
and End Plane |
Defines the length of the
members. |
Plane
Set 1 |
|
Plane
Set 2 |
|
Point Length Member
Creates a member originating at a point and extends to a specified
end condition.
Points |
Select points in sketch. |
End Condition
Specifies end condition for a point length member.
Length |
Defines a direction and a dimension for the length of
a primary member. |
Point |
Extends a primary member from the start point to
the end point. Click Chain
Link to add members along a chain of points.
|
Up to Point |
Extends a primary member up to the selected point.
|
Up to Plane |
Extends a primary member from a point to a plane.
The member extrudes in the direction of the reference plane.
|
Face Plane Intersection Member
Creates a member along the intersection of a face or surface, and a
plane.
Faces |
|
Intersecting Planes |
|
Start/End Extend
Extends members from a starting location to an end point.
Split Member
Divides a member into multiple separate members based on a Reference or a
Dimension.
Reference |
Splits members with an
intersecting face, reference plane, or another member. |
Dimension |
Defines a split by
Length and Number of
Instances. |