To
open the Body Compare PropertyManager:
Click
. You can also select Body Compare from the Evaluate and Mesh Modeling
tabs in the CommandManager.
Body Compare is not
available if the part is a single body or if the assembly contains only one body
component.
Specify options to compare bodies:
Color Settings
|
Legend Threshold |
Specifies the absolute value of
deviation allowed by the scale. Move the slider to change the
distances. |
|
Show
Legend on Screen |
Displays the legend after closing
the Body Compare
PropertyManager. |
|
Accuracy |
Improves the accuracy of the body compare. Higher accuracy might impact
performance.
This slider is disabled when the compare bodies
are graphics mesh bodies.
|
|
Unmatched
color |
Identifies areas on the compare
bodies that do not match the source bodies. For
example, you compare bodies where the compare body is not a
complete reproduction of the source body. The unmatched color
appears in areas where there is no corresponding geometry on the
source bodies. Either the geometry is missing or is too far
away.
Click Edit Color to select a color.
|
After you create a body compare analysis, the analysis remains on
display in the graphics area. To close the analysis, right-click in the graphics
area and click Body Compare
. To modify the analysis options,
right-click in the graphics area and click Body Compare
Properties.