Hide Table of Contents

Simultaneously Edit Multiple Contact Sets Example (C#)

This example shows how to add multiple contact sets to a frequency study and simultaneously edit them.

NOTE: To get persistent reference identifiers (PIDs) for model selections, you can use pidcollector.exe or IModelDocExtension::GetPersistReference3.

//----------------------------------------------------------------------------
// Preconditions:
// 1. Add the SOLIDWORKS Simulation as an add-in (in SOLIDWORKS, click 
//    Tools > Add-ins > SOLIDWORKS Simulation > OK).
// 2. Add the SOLIDWORKS Simulation primary interop assembly as a reference
//    (in the IDE, click Project > Add Reference > .NET > 
//    SolidWorks.Interop.cosworks > OK).
// 3. Ensure that the specified model document exists.
// 4. Open the Immediate window.
//
// Postconditions:
// 1. Opens the model.
// 2. Gets the Ready study.
// 3. Adds two contact sets.
// 4. Simultaneously edits the contact sets to change types
//    from Bonded to Allow Penetration.
// 5. Creates a mesh.
// 6. Runs an analysis.
// 7. Inspect the Immediate window and the Simulation Study tree.
//
// NOTE: Because the model is used elsewhere, do not save changes.
//---------------------------------------------------------------------------
using Microsoft.VisualBasic;
using System;
using System.Collections;
using System.Collections.Generic;
using System.Data;
using System.Diagnostics;
using SolidWorks.Interop.sldworks;
using SolidWorks.Interop.swconst;
using SolidWorks.Interop.cosworks;
 
 
namespace EditContactSets_CSharp.csproj
{
    partial class SolidWorksMacro
    {
 
        public void Main()
        {
 
            CosmosWorks COSMOSWORKS = default(CosmosWorks);
            CwAddincallback COSMOSObject = default(CwAddincallback);
            CWModelDoc ActDoc = default(CWModelDoc);
            CWStudyManager StudyMngr = default(CWStudyManager);
            CWStudy Study = default(CWStudy);
            CWMesh CwMesh = default(CWMesh);
            CWResults CWResult = default(CWResults);
            ModelDoc2 Part = default(ModelDoc2);
            CWContactManager ContactMgr = default(CWContactManager);
            CWContactSet CWContactSet = default(CWContactSet);
            object pDisp1 = null;
            object pDisp2 = null;
            object pDisp3 = null;
            byte[] var8 = null;
            byte[] var9 = null;
            byte[] var10 = null;
            object[] Freq = null;
            string str1 = null;
            string str2 = null;
            string str3 = null;
            int longstatus = 0;
            int longwarnings = 0;
            int errCode = 0;
            double el = 0;
            double tl = 0;
            int i = 0;
 
 
            swApp.OpenDoc6("C:\\Users\\Public\\Documents\\SOLIDWORKS\\SOLIDWORKS 2017\\Simulation Examples\\shaft.sldasm", (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref longstatus, ref longwarnings);
            Part = (ModelDoc2)swApp.ActiveDoc;
 
            COSMOSObject = (CwAddincallback)swApp.GetAddInObject("SldWorks.Simulation");
            if (COSMOSObject == null)
                ErrorMsg(swApp, "COSMOSObject object not found");
 
            COSMOSWORKS = COSMOSObject.CosmosWorks;
            if (COSMOSWORKS == null)
                ErrorMsg(swApp, "COSMOSWORKS object not found");
 
            ActDoc = COSMOSWORKS.ActiveDoc;
            if (ActDoc == null)
                ErrorMsg(swApp, "No active document");
 
            // Gets the Ready study
            StudyMngr = ActDoc.StudyManager;
            if (StudyMngr == null)
                ErrorMsg(swApp, "No CWStudyManager object");
 
            Study = StudyMngr.GetStudy(0);
            if (Study == null)
                ErrorMsg(swApp, "No study found");
 
            // Get selections for multiple contact sets

            // Shaft source
            str1 = "189,35,0,0,3,0,0,0,255,254,255,23,111,0,118,0,101,0,114,0,101,0,110,0,100,0,101,0,114,0,32,0,115,0,104,0,97,0,102,0,116,0,45,0,49,0,64,0,115,0,104,0,97,0,102,0,116,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,13,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,58,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,111,0,118,0,101,0,114,0,101,0,110,0,100,0,101,0,114,0,32,0,115,0,104,0,97,0,102,0,116,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,";
            str1 = str1 + "9,128,255,254,255,15,111,0,118,0,101,0,114,0,101,0,110,0,100,0,101,0,114,0,32,0,115,0,104,0,97,0,102,0,116,0,2,0,0,5,73,58,52,255,254,255,0,0,123,22,28,65,1,0,0,0,0,0,0,0,35,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,45,0,0,0,0,0,0,0,123,22,28,65,10,0,0,0,65,73,58,52,1,0,0,0,255,255,1,0,19,0,109,111,70,105,108,108,101,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,13,0,0,0,97,73,58,52,1,0,0,0,0,0,12,128,0,0,5,128,8,0,14,0,0,0,108,73,58,52,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0";
            StringtoArray(str1, ref var8);
            pDisp1 = Part.Extension.GetObjectByPersistReference3((var8), out longstatus);
 
            // Bore 1 target
            str2 = "189,35,0,0,3,0,0,0,255,254,255,28,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,45,0,50,0,64,0,115,0,104,0,97,0,102,0,116,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,21,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,20,0,109,111,69,110,100,70,97,99,101,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,63,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,46,0,8";
            str2 = str2 + "3,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,20,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,2,0,0,130,66,58,52,255,254,255,0,0,144,22,28,65,1,0,0,0,0,0,0,0,34,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,52,0,0,0,0,0,0,0,144,22,28,65,15,0,0,0,58,68,58,52,1,0,0,0,255,255,255,255,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,15,0,0,0,58,68,58,52,1,0,0,0,0,0,12,128,0,0,5,128,8,0,19,0,0,0,141,68,58,52,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0";
            StringtoArray(str2, ref var9);
            pDisp2 = Part.Extension.GetObjectByPersistReference3((var9), out longstatus);
 
            // Bore 2 target
            str3 = "189,35,0,0,3,0,0,0,255,254,255,28,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,45,0,49,0,64,0,115,0,104,0,97,0,102,0,116,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,20,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,20,0,109,111,69,110,100,70,97,99,101,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,63,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,46,0,8";
            str3 = str3 + "3,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,20,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,2,0,0,130,66,58,52,255,254,255,0,0,144,22,28,65,1,0,0,0,0,0,0,0,34,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,52,0,0,0,0,0,0,0,144,22,28,65,15,0,0,0,58,68,58,52,1,0,0,0,255,255,255,255,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,15,0,0,0,58,68,58,52,1,0,0,0,0,0,12,128,0,0,5,128,8,0,19,0,0,0,141,68,58,52,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0";
            StringtoArray(str3, ref var10);
            pDisp3 = Part.Extension.GetObjectByPersistReference3((var10), out longstatus);
 
            // Create arrays
            object[] varArray3 = { pDisp1 };
            object[] varArray4 = { pDisp2 };
            object[] varArray5 = { pDisp3 };
 
            // Add bonded contact sets
            ContactMgr = Study.ContactManager;
            if (errCode != 0)
                ErrorMsg(swApp, "No ContactManager object");
            CWContactSet = ContactMgr.CreateContactSet2((int)swsContactType_e.swsContactTypeBonded, 0, (varArray3), (varArray4), out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "No CWContactSet object");
 
            CWContactSet = ContactMgr.CreateContactSet2((int)swsContactType_e.swsContactTypeBonded, 0, (varArray3), (varArray5), out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "No CWContactSet object");
 
            // Simultaneously edit both contact sets
            CWMultipleContactSetsEditManager multCSEM = default(CWMultipleContactSetsEditManager);
            multCSEM = Study.MultipleContactSetsEditManager;
            errCode = multCSEM.AddContactSet("Contact Set-1");
            errCode = multCSEM.AddContactSet("Contact Set-2");
            Debug.Print("Number of contact sets added: " + multCSEM.GetContactSetCount());
            multCSEM.MultipleContactSetsBeginEdit();
            errCode = multCSEM.SetAsDefaultContactSet("Contact Set-1");
            errCode = multCSEM.SetContactType((int)swsContactType_e.swsContactTypeFreeOrInsulated);
            multCSEM.MultipleContactSetsEndEdit();
 
            // Mesh
            CwMesh = Study.Mesh;
            if (CwMesh == null)
                ErrorMsg(swApp, "No CWMesh object");
 
            CwMesh.Quality = 1;
            CwMesh.GetDefaultElementSizeAndTolerance((int)swsLinearUnit_e.swsLinearUnitMillimeters, out el, out tl);
 
            errCode = Study.CreateMesh((int)swsLinearUnit_e.swsLinearUnitMillimeters, el, tl);
            if (errCode != 0)
                ErrorMsg(swApp, "Mesh failed");
 
            // Run analysis
            errCode = Study.RunAnalysis();
            if (errCode != 0)
                ErrorMsg(swApp, "Analysis failed with error code as defined in swsRunAnalysisError_e: " + errCode);
 
            // Get results
            CWResult = Study.Results;
            if (CWResult == null)
                ErrorMsg(swApp, "No CWResults object");
 
            Freq = (object[])CWResult.GetResonantFrequencies(out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "No frequency result");
 
            Debug.Print("Resonant frequencies:");
 
            for (i = 0; i <= Freq.GetUpperBound(0); i++)
            {
                Debug.Print(Freq[i].ToString());
            }
        }
 
        private void ErrorMsg(SldWorks SwApp, string Message)
        {
 
            SwApp.SendMsgToUser2(Message, 0, 0);
            SwApp.RecordLine("'*** WARNING - General");
            SwApp.RecordLine("'*** " + Message);
            SwApp.RecordLine("");
 
        }
 
        private void StringtoArray(string inputSTR, ref byte[] varEntity)
        {
 
            string[] PIDArray = null;
            byte[] PID = null;
            int i;
 
            // Parse string into an array
            PIDArray = inputSTR.Split(new char[] { ',' });
 
            //Convert string array to byte array
            int sizeArray = PIDArray.Length;
 
            PID = new byte[sizeArray];
 
            for (i = 0; i < PIDArray.Length; i++)
            {
                PID[i] = Convert.ToByte(PIDArray[i]);
            }
 
            varEntity = PID;
        }
 
        /// <summary>
        /// The SldWorks swApp variable is pre-assigned for you.
        /// </summary>
 
        public SldWorks swApp;
 
    }
}



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Simultaneously Edit Multiple Contact Sets Example (C#)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2020 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.19