Set thresholds at which CircuitWorks warns of potential build problems.
To display CircuitWorks Options - Warnings:
From the CircuitWorks Options dialog box, click Warnings .
To display the CircuitWorks Options dialog box, do one of the following:
-
From CircuitWorks, click the CircuitWorks application menu
, then click Options
.
- From SOLIDWORKS, click .
Warnings
Warn me when CircuitWorks has to create more than |
Specify warning thresholds for:
-
New components - CircuitWorks only builds a component model when there is no model in the Component Library. Building a large number of models can take considerable time. Consider filtering out components that are not required.
-
Drilled holes, Keep-out or keep-in areas, Traces, Pads, Filled areas, Annotations - Building a board with a large number of features increases the model build time and the size of the resulting model file. CircuitWorks warns you if a threshold will be exceeded before building a model. You can optionally cancel the build and filtering out features to reduce the amount of modeling required.
|
Warn me before
Overwriting the board model |
Prompt before overwriting existing board files (the same board was previously modeled by CircuitWorks).
|
Overwriting any component models |
Prompt before overwriting existing component model files (the same component was previously modeled by CircuitWorks).
|
Progress messages
Show all messages |
Displays import and export progress messages in addition to errors and warnings. |
Show only errors and warnings |
|
General
Show message if CircuitWorks encounters errors on import |
When cleared, suppresses import error messages. |