Adding a Connection Point To add a connection point: Create a sketch point to use for locating the connection point. The location of the connection point defines the end of the adjoining routing segment; that is, the point where the pipe, tube or wiring begins or ends. Click Create Connection Point (Routing Tools toolbar) or Tools > Routing > Routing Tools > Create Connection Point. To create a connection point on a cylindrical feature, select the flat face of the feature. You do not need to create a sketch point first. The Connection Point PropertyManager appears. Edit properties in the PropertyManager. Click . Repeat this process for fittings that support multiple CPoints. To create an assembly connection point, create the connection point in the part. Then in the assembly, select the CPoint from the part. An assembly connection point always copies the characteristics of an existing part connection point. Parent topicRouting Points Connection and Route Points Sketch Point for a Connection Point Adding a Route Point Connection Point PropertyManager View and Edit Connection Point Parameters Components with Multiple Connection Points Connection Point Parameters in a Design Table Route CPoints PropertyManager