Trusses
... of freedom at each node (joint). Fixed and Immovable (No translations) restraints are similar for ...
Simulation > Analysis Background > Beams and Trusses
Apply-Edit Beam PropertyManager
For example, if you define a beam end as a Hinge and apply a Fixed restraint to the associated joint...
Simulation > Analysis Background > Beams and Trusses > Performing Analysis Using Beams or Trusses
Performing a Response Spectrum Analysis
To define fixtures, right-click Fixtures...For selected base excitation, the response spectrum is applied to a selected fixture definition...If the selected fixture has more than one direction, you...
Simulation > Analysis Background > Dynamic Analysis > Response Spectrum Analysis
Axisymmetric
Use the axisymmetric option when the geometry, material properties, loads, fixtures, and contact conditions have a rotational symmetry about an axis
Simulation > Analysis Background > 2D Simplification
Defining a Fatigue Check Plot
. Set up a Static study with the appropriate material, contact conditions, loads and fixtures. ...
Simulation > Analysis Background > Fatigue Analysis > Fatigue Check Plot
Plane Stress
For this example, you select a section plane parallel to the XZ plane, specify the thickness, and apply loads and fixtures to the
2D Simplification Options
Models geometries, material properties, loads, and fixtures that have a rotational symmetry about an axis
Applying Selected Base Excitation for a Random Vibration Study
... the curve. The base motion governed by the PSD curve is applied to the selected fixtures. Click ...
Simulation > Analysis Background > Dynamic Analysis > Loads and Result Options for Dynamic Analysis > Selected Base Excitation PropertyManager
Plane Strain
section plane parallel to the XZ plane, specify the thickness, and apply the loads and fixtures to the edges
Performing Harmonic Analysis
. Right-click the Fixtures icon in the Simulation study tree and select from the options. You can ...
Simulation > Analysis Background > Dynamic Analysis > Performing Linear Dynamic Analysis
Performing Random Vibration Analysis
Performing Static Analysis
. Right-click the Fixtures icon in the Simulation study tree and select from the list. Apply ...
Simulation > Analysis Background > Linear Static Analysis
Input for Linear Static Analysis
. They are not used in calculating stresses. Fixtures Adequate restraints to prevent the body from ...
Performing Modal Time History Analysis