Plasticity Tresca Model

... value 0. The radius of the yield surface expands but its center remains fixed in deviatoric space. ...

Point Light PropertyManager

When cleared, the light remains fixed in the model space...When cleared, the light remains fixed in the model space

Recognizing Features Interactively

Fixed face...The fixed face must meet and be on the same side (inner or outer) as the selected miter flange faces

FeatureManager Design Tree Conventions

...: Over defined (–) Under defined Not solved Fixed (locked in place) Assembly mates are preceded by: ...

Axes Dialog Box

... plot. Consider a cylinder that is subjected to an internal pressure and fixed at the bottom. The ...

Slot PropertyManager

entity. Relations specific to slots: Fix Slot...The slot size and location are fixed. Equal Slots ...

Edit Bends

Under Bend Parameters: On the model, select a linear edge on an end face of a cylindrical or conical face, or select a planar face for Fixed Face or

Decals Mapping PropertyManager

...select one or two of the following options: Fixed aspect ratio Fit width to selection Fit height to

Simulation Study Tree

Connections folder, a Fixtures folder, an External Loads folder, and a Mesh folder...Fixtures and load conditions are represented by unique icons in...the Fixtures and External Loads folders, respectively, and contact conditions appear in the Connections folder

Search Criteria for Advanced Component Selection

... Has Mates - Fully Defined Has Mates - Over Defined Fixed In Context Relations Has broken external

Prerequisites For Electrical Routing

... avoided. Position the fixed components using mates, dimensions, or relations to a layout sketch, ...

Plasticity von Mises Model

... 0. The radius of the yield surface expands but its center remains fixed in deviatoric space. For ...

Notes Overview

A note can be free floating or fixed, and it can be placed with a leader pointing to an item (face, edge, or vertex) in the document

Mates: Frequently Asked Questions

A tooltip appears at the location you pick if the part is fixed...Yellow errors can also be caused by fixed components...The best practice is to fix over defined mates when

Jogs

In the graphics area, select a face for Fixed Face...Select Fix projected length if you want the face of the jog to stay the same length...If you clear the Fix projected length check box, no material is added to the tab to make the jog

Converting a Solid Part to a Sheet Metal Part

... table. Under Sheet Metal Parameters: Select a face as the fixed face for the sheet metal part. Set ...

Best Practices for Mates

prone to “nuisance” errors (errors that fix themselves when you drag...Dragging a component occasionally snaps it into place and fixes mate errors...Suppressing and unsuppressing mates with errors sometimes fixes mate errors

Error Message - Shell Errors

edge. Potential Fixes and Tips...the shell when you have fixed the problems with the parent features.

Creating a Part in an Assembly

... part is coincident with the origin of the assembly, and the part 's position is fixed. Construct ...

Rotating Components

You cannot rotate a component whose position is fixed or fully defined. You can only rotate a ...

Use Inplane Effect

It is also assumed that the magnitude and direction of the loads remain fixed and their points of application move with the

Degrees of Freedom

for your model: Create rigid subassemblies and rigid groups for components that are fixed with respect to the assembly motion

Costing Options

Apply fixed custom costs to sheet metal features, such as bends, hems, or library features...Lets you assign a fixed cost per unit volume of removed material, rather than calculate the cost based on tool sizes and removal rates

Route Properties PropertyManager

Fix diameter...Select to fix the route diameter to the value set in OD...If you want to highlight a fixed diameter route, click Routing > Routing Tools > Highlight Fixed Diameter Route...

Insert Part PropertyManager

Transfers the sheet metal and flat pattern information from the original part to the mirrored part such as fixed face, grain direction, bend lines...