Sketch Relations in Configurations

For example, to control the suppression state of the first fixed relation in Sketch2, the column heading syntax is $STATE@Fixed1@Sketch2

Sheet Metal Features

... radius, bend allowance, auto relief ratio, and fixed entity) for the entire part. Sheet-Metal is ...

Reusing an Electrical Route

... of the reused harness and the fixed length parameter is applied. All configurations, if more than ...

Simulation Toolbar - Fixtures/External Loads

The Fixtures/External Loads category provides tools related to fixtures and loads...Fixtures...Defines a fixture on the selected entities for the active structural study (static, frequency, buckling, or nonlinear study...

Move/Copy Body PropertyManager

... bodies that are not selected are treated as fixed...are treated as fixed. Entities to mate Select two ...

Move/Copy Body PropertyManager

... bodies that are not selected are treated as fixed...are treated as fixed. Entities to mate Select two ...

Plasticity Tresca Model

... value 0. The radius of the yield surface expands but its center remains fixed in deviatoric space. ...

Point Light PropertyManager

When cleared, the light remains fixed in the model space...When cleared, the light remains fixed in the model space

Recognizing Features Interactively

Fixed face...The fixed face must meet and be on the same side (inner or outer) as the selected miter flange faces

FeatureManager Design Tree Conventions

...: Over defined (–) Under defined Not solved Fixed (locked in place) Assembly mates are preceded by: ...

Reusing Routes for Tubes and Hoses

... tube route assembly and the fixed length parameter is applied. All configurations, if more than ...

Axes Dialog Box

... plot. Consider a cylinder that is subjected to an internal pressure and fixed at the bottom. The ...

Nonlinear Analysis (Available in SOLIDWORKS Simulation)

...if the material behavior is nonlinear, deformations are large, or loads or fixtures vary with time.

Slot PropertyManager

entity. Relations specific to slots: Fix Slot...The slot size and location are fixed. Equal Slots ...

Edit Bends

Under Bend Parameters: On the model, select a linear edge on an end face of a cylindrical or conical face, or select a planar face for Fixed Face or

Decals Mapping PropertyManager

...select one or two of the following options: Fixed aspect ratio Fit width to selection Fit height to

Simulation Study Tree

Connections folder, a Fixtures folder, an External Loads folder, and a Mesh folder...Fixtures and load conditions are represented by unique icons in...the Fixtures and External Loads folders, respectively, and contact conditions appear in the Connections folder

Search Criteria for Advanced Component Selection

... Has Mates - Fully Defined Has Mates - Over Defined Fixed In Context Relations Has broken external

Prerequisites For Electrical Routing

... avoided. Position the fixed components using mates, dimensions, or relations to a layout sketch, ...

Plasticity von Mises Model

... 0. The radius of the yield surface expands but its center remains fixed in deviatoric space. For ...

Notes Overview

A note can be free floating or fixed, and it can be placed with a leader pointing to an item (face, edge, or vertex) in the document

Mates: Frequently Asked Questions

A tooltip appears at the location you pick if the part is fixed...Yellow errors can also be caused by fixed components...The best practice is to fix over defined mates when

Jogs

In the graphics area, select a face for Fixed Face...Select Fix projected length if you want the face of the jog to stay the same length...If you clear the Fix projected length check box, no material is added to the tab to make the jog

Converting a Solid Part to a Sheet Metal Part

... table. Under Sheet Metal Parameters: Select a face as the fixed face for the sheet metal part. Set ...

Best Practices for Mates

prone to “nuisance” errors (errors that fix themselves when you drag...Dragging a component occasionally snaps it into place and fixes mate errors...Suppressing and unsuppressing mates with errors sometimes fixes mate errors