Mate Errors

The mate is attempting to locate a component that is fixed...See Techniques for Fixing Mate Problems...This mate is trying to move a component in a way it cannot move because the component is either fixed or constrained by other mates

Applying a Prescribed Displacement

In the Fixture PropertyManager, select one of the following: Use Reference Geometry...column cell at a particular time step, the selected dofs are considered fixed

Mating Fittings in Routing Subassemblies

. If the fitting is fixed or mated, it always drives the sketch, and its status cannot be changed. ...

Assembly Sequence PropertyManager

. The base part selection is fixed and sets the origin of measurement for the evaluation. Example: ...

Inserting Several Components at the Same Location

In the FeatureManager design tree, (f) beside each component indicates that the component locations are fixed...If the assembly was empty, then the first component is fixed and the

The FeatureManager Design Tree in an Assembly

. The prefixes are: Under defined Over defined Fixed Not solved The absence of a prefix indicates ...

Yaw, Pitch, and Roll in Results

..., pitch, and roll define one such space-fixed rotation sequence. There are multiple ways to define ...

Edit Scene PropertyManager - Advanced

... Edit Scene. Click the Advanced tab. Fixed aspect ratio Scales the floor uniformly as you change ...

Thermal - Advanced Options

... by the program, or select Fixed to directly specify a value. A value of 1 allows the solution to ...

Slope PropertyManager

The start point must be a fixed point that the pipe segment can use to rotate and create the slope.

Convert to Sheet Metal Tool

In the Convert to Sheet Metal PropertyManager, you specify the fixed face and thickness of the sheet metal part, the default bend radius, and the

Fixtures

The Fixture PropertyManager allows you to prescribe zero or non-zero displacements on vertices, edges, or faces for use with static, frequency...

Fixtures and Loads

Fixtures and loads define the environment of the model...Loads and fixtures are fully associative and automatically adjust to changes in geometry...You can organize fixtures, loads, and connectors into folders

Design Table Configurations

You can control the following parameters in an assembly design table: components – suppression state, referenced configuration, fixed or floating

Document Properties - Weld Symbols

... to apply these layer settings. Fixed size weld symbols Clear to scale the size of the symbol to ...

Swept Flanges for Conical and Cylindrical Bodies

... that propagates to the flat pattern as a fixed entity. The Cylindrical/Conical Bodies option is ...

Creating Opposite-Hand Versions of Sheet Metal Parts

information from the original part to the mirrored part, such as fixed face, grain direction, bend lines, and bounding box

Document Properties - Sheet Metal

Show fixed face...Displays the fixed face that is defined in the flat pattern feature of the sheet metal part...To view the fixed face, the flat pattern view must

Document Properties - Sheet Metal

Show fixed face...Displays the fixed face that is defined in the flat pattern feature of the sheet metal part...To view the fixed face, the flat pattern view must

SOLIDWORKS to DXF/DWG Mapping

... and Line Style from the lists. Layers and DEFPOINTS are fixed layers. You cannot edit or delete ...

Sketched Bend PropertyManager

. In the graphics area, select a face that does not move as a result of the bend for Fixed Face ...

Sheet Metal PropertyManagers

..., bend radius, bend allowance, auto relief ratio, and fixed entity) for the entire part. Flatten-...

Repair Sketch

If you have updated the sketch, click Refresh to verify that you have fixed previous errors or to find new errors

Repair Sketch

If you have updated the sketch, click Refresh to verify that you have fixed previous errors or to find new errors

Example: Conflicting Mates

... the mate. The components can be fixed or mated to other components. The bottom faces of these two ...