Fixed Fastener Assembly

Fixed Fastener Assembly

Using Float in a Fixed Fastener Assembly

Using Float in a Fixed Fastener Assembly...This example illustrates the effects fastener float has on a measurement with parts constrained by fixed fastener assemblies

Examples: Fixed and Floating Fastener Assemblies

TolAnalyst can consider the clearances resulting from fixed and floating fastener assemblies when it computes the worst case tolerance conditions...For fixed fastener assemblies, float applies to the part with clearance holes only...Fixed Fastener Assemblies

Fixed Fastener Assembly with Float

Fixed Fastener Assembly with Float To evaluate the worst case scenario considering fastener float: ...

Fixed Fastener Assembly Without Float

Fixed Fastener Assembly Without Float To evaluate the worst case scenario without considering ...

Example: Selecting the Base Part

The base part is fixed in the tolerance analysis, and from it, all remaining parts are assembled...In each case, the base part remains fixed and oriented to the assembly coordinate system and the measurement remains along its X-axis

Assembly Sequence PropertyManager

. The base part selection is fixed and sets the origin of measurement for the evaluation. Example: ...

Example: Selecting the Part Order

result, and to determine if fixtures are required...The top plate is fixed to the "L"-shaped base part using a green-colored

Analysis Results PropertyManager

... the hole and fastener. Examples: Fixed and Floating Fastener Assemblies Tolerance precision Sets ...

Applying the Assembly Constraints

constrained PM_Constrained.gif because it is fixed as the origin part. The constraint options appear...