Deform - Curve to Curve Options

Select the fixed edges and additional faces to deform in the graphics area...without fixing edges, the deform is limited to the selected face...Available when Fixed edges is cleared and Uniform is selected.) Creates a bending-like deformation, using the Deform radius

Recognized Sketch Constraints

... fully defined. Concentric and fixed relations are added...Only fixed relations are added. Sketch can ...

Deform - Point Options

Deformation area is not affected if Fixed Curves/Edges/Faces...Deformation area is limited to that face if Fixed Curves/Edges/Faces...Clear Maintain boundary to change the deform region, modify fixed edges, or allow the boundaries to move

Snap Hook Groove PropertyManager

... and Body Selections For all calculations, the snap hook remains fixed; the snap hook groove ...

Vent PropertyManager

) Select a starting plane (remains fixed) from which the draft is applied...This value remains fixed. ...

Recognizing Features Automatically

Sketched bend Edge Flange Fixed face...You must select a Fixed Face select_face_planar.png Button to ...

Interactive Feature Recognition Selections

Fixed face...Select the fixed face along which the part was bent...Select the inner or outer flange face of the miter flange that meets the fixed face

Move/Copy Body PropertyManager

... bodies that are not selected are treated as fixed...are treated as fixed. Entities to mate Select two ...

Move/Copy Body PropertyManager

... bodies that are not selected are treated as fixed...are treated as fixed. Entities to mate Select two ...

Recognizing Features Interactively

Fixed face...The fixed face must meet and be on the same side (inner or outer) as the selected miter flange faces

Flex Examples

... Triad. The trim plane or triad are fixed in place for bending and other flex operations. The region...

Deforming a Model Using Point

... region. With Deform region selected, you can also select Fixed Curves/Edges/Faces PM_deform_fixed-...

Deform - Curve to Curve

curves. Options for controlling deform shapes let you: Fix edges and faces so they cannot move. Add ...

FeatureXpert

... error. Click FeatureXpert in the dialog to run the FeatureXpert to attempt to fix the error. The ...

FeatureWorks Options

... to sketch Adds a Fix relation to each entity in a sketch, fully defining the sketch. If this check...

Pattern Tables

... a message warns that you might need to fix missing references in the equation. If you try to paste ...

Fill Surface PropertyManager

... create a solid model with the Filled Surface tool. Fix up boundary Constructs a valid boundary by ...

Boundary PropertyManager

If the boundary feature connectors are incorrect, right-click in the graphics area and select Flip Connectors to try to fix them