Video_Camera Normal To

Two fixed normal motions

Two fixed normal motions

Normal Cut

When adding a cut to a folded sheet metal part, select Normal cut to ensure that the cut is created normal to the sheet metal thickness...Normal cut is...both models, but Normal cut is selected in the top model

Normal To Command

You can use the Normal To command to orient a model normal to the nearest global XYZ coordinates...To orient a model normal to the nearest global XYZ coordinates...For more information on the Normal To command, see SolidWorks Help: Orientation

Orienting a Model to XYZ Coordinates

You can use the Normal To command to orient a model normal to the nearest global XYZ coordinates...To orient a model normal to the nearest global XYZ coordinates...For more information on the Normal To command, see Orientation

Reference Plane Normal to Edge

You can sketch on a reference plane, created automatically, normal to an edge...To sketch on a reference plane normal to an edge...A reference plane normal to the selected edge is created at the end point of the edge closest to the selected area

Section Display Types

Section Display Types Alternate Section Display Normal Section Display

Using Normal to Origin Feature

With Normal to origin feature cleared, the evaluation dimension Y is taken along the Y axis...With Normal to origin feature cleared, the maximum offset between the two pipes is 7...With Normal to origin feature selected, the maximum offset between the two pipes is 9

Stress Components

SX: Normal stress in the X-direction of the selected reference geometry...SY: Normal stress in the Y-direction of the selected reference geometry...SZ: Normal stress in the Z-direction of the selected reference geometry

Stress

direction acting normal to the XY-plane TXY Stress in the Y-direction acting on the plane normal to the X-direction (YZ-plane) TYX Stress in the X...direction acting on the plane normal to the Y-direction (XZ-plane) TXZ Stress in the Z-direction acting on the plane normal to the X-direction (YZ...plane) TZX Stress in the X-direction acting on the plane normal to the Z-direction (XY-plane) TYZ Stress in the Z-direction acting on the plane normal to the Y-direction (XZ-plane) TZY Stress in the Y-...

Examples of Loft Tangency

None End Constraint Normal to Profile...Normal to Profile...Normal to Profile End Constraint Normal to

Maximum Normal Stress Criterion

Maximum Normal Stress Criterion...The maximum normal stress criterion also known as Coulomb’s criterion is based on the Maximum normal stress theory

Strain Components

EPSX: Normal strain in the X-direction of the selected reference geometry...EPSY: Normal strain in the Y-direction of the selected reference geometry...EPSZ: Normal strain in the Z-direction of the selected reference geometry

Edge Weld Definitions

Surface Normal, Us: Axis is normal to the top...Weld Joint Normal, Uj: Axis is normal to the intersecting shell edge of the terminated part and oriented away from the part...Joint Normal Force A component of the weld force (Tj) acting normal to

Roller/Sliding

Use the Roller/Sliding restraint to specify that a planar face can move freely into its plane but CANNOT move in the direction normal to its plane

Mate Alignment

Vectors normal to the selected faces point in the same direction...Vectors normal to the selected faces point in opposite directions

Default Options - Plot - Static Study

SX: X Normal stress...SY: Y Normal stress...SZ: Z Normal stress TXY: Shear in Y direction on YZ plane TXZ:...

On Flat Face

the other two directions (Dir 2 and Normal) to zero enforces this condition...Along face direction 1 Along face direction 2 Normal to face Rotations (for shells only...About face direction 1 About face direction 2 About normal to face

Using a Model Face

in the direction normal to the face...Along face direction 1 Along face direction 2 Normal to face Rotations (for shells and beams only...About face direction 1 About face direction 2 About normal to face

Default Options - Plot - Nonlinear Study

SX: X Normal stress...SY: Y Normal stress...SZ: Z Normal stress TXY: Shear in Y direction on YZ plane TXZ:...

Using a Reference Plane

direction normal to the plane...Along plane direction 1 Along plane direction 2 Normal to plane Rotations (for shells and beams only...About plane direction 1 About plane direction 2 About normal to plane

Animation Controller Pop-up Toolbar

... the animation. Normal...Display at normal speed...Display at half the normal speed. Fast Play . Display ...

Example of Extrusion Direction for Ribs

on a parallel plane. Extrusion Direction: Parallel to Sketch Extrusion Direction: Normal to Sketch

Resolved

Resolved (or unsuppressed) is the normal state for assembly components. A resolved component is ...

Loft Features

... loft entities: End conditions Normal to profile and Direction vector Guide curves Profile