Flatten Route PropertyManager
You can flatten an electrical route sub-assembly to create:
To flatten a route:
In the route sub-assembly, click Flatten
Route 
(Electrical toolbar) or Routing,
Electrical, Flatten
Route.
Set options in the PropertyManager as described
below.
Click 
.
The flattened route is created as a new configuration
of the 3D electrical route sub-assembly. In the FeatureManager design
tree, a Flattened Route 
feature is added.
To toggle between the 3D
and flattened route, right-click Route
or Flattened Route
and select Show Configuration.
If you selected Drawing
Options, the software creates a drawing file with a flattened view
of the route.
Flatten Type
Annotation.
Specifies simplified representations of the route as a flattened configuration
and drawing. The lines are not true lengths, but the annotations on the
route segments display the true length of the routed wire.
Manufacture. Specifies scaled
representations of the route as a flattened configuration and drawing.
These representations are made to scale within a region.
Flatten Options
Display 3D connectors. Displays
the 3D models of the connectors in the flattened route.
Use drawing connector blocks.
Displays 2D drawing blocks of the connectors in the drawing of the flattened
route. No connectors appear in the flattened configuration of the model.
Drawing Options
Select tables and annotations to appear on the drawing. Click Open Table Template 
to browse for different templates.
Electrical
BOM. Adds a bill of materials to the drawing. The default template
is bom-standard.sldbomtbt.
Cut list.
Adds a table called Circuit Summary
to the drawing. The table lists cut lengths and connection information
for each conductor. The default template is bom-circuit-summary.sldbomtbt.
Connector
table. Adds a table for each connector with pin/cavity designations
and the corresponding names of wires. The default template is connector-table.sldtbt.
Auto balloons.
Balloons are added for each item in the bill of materials