Hide Table of Contents

Document Properties - Chamfer Dimensions

You can specify document-level drafting settings for chamfer dimensions.

To open this page, with a drawing open, click Options (Standard toolbar), select Document Properties, and then select Dimensions > Chamfer.

Overall drafting standard

Overall drafting standard Inherited from the selected Drafting Standard page settings.

Base chamfer dimension standard

Base chamfer dimension standard
Select a standard:
  • ANSI
  • ISO
  • DIN
  • JIS
  • BSI
  • GOST
  • GB

Leader style

Leader Style Select: a style.
Leader Thickness Select: a thickness or select Custom Size and enter a thickness.

Text

Font

Click to modify the font.
Horizontal text justification Left
Center
Right
Vertical text justification Top
Middle
Bottom

Chamfer text format

1 X 1 Distance by distance
1 X 45° Distance by angle
45° X 1 Angle by distance
C1 Chamfer distance (45 degree angles only)
"X" format Select lower or upper case x.  

Primary precision

Unit Precision Select the number of digits included after the decimal point for the value.
Tolerance Precision Select the number of digits included after the decimal point for the tolerance.

Angular precision

Unit Precision Select the number of digits included after the decimal point for the value.
Tolerance Precision Select the number of digits included after the decimal point for the tolerance.

Layer

Layer
Select a layer.
You must first create layers for the drawing before you can select them for document properties.
You must select Per Standard for Layer (Layer toolbar) in the drawing view document to apply these layer settings.

Text position

Horizontal Text
Horizontal, Underlined Text
Angled Text
Angled, Underlined Text

Options

Tolerance

Click to set the tolerance.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Document Properties - Chamfer Dimensions
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2010 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.21