2D to 3D Toolbar
The 2D to 3D tools help you convert a 2D drawing to a 3D part. Some
of the tools can be used in any sketches.
|
Front.
The selected sketch entities become the front view in converting to a
3D part. |
|
Top.
The selected sketch entities become the top view in converting to a 3D
part. |
|
Right.
The selected sketch entities become the right view in converting to a
3D part. |
|
Left.
The selected sketch entities become the left view in converting to a 3D
part. |
|
Bottom.
The selected sketch entities become the bottom view in converting to a
3D part. |
|
Back.
The selected sketch entities become the back view in converting to a 3D
part. |
|
Auxiliary.
The selected sketch entities become an auxiliary view in converting to
a 3D part. You must select a line in another view to specify the angle
of the auxiliary view. |
|
Create Sketch from Selections. The
selected sketch entities become a new sketch. You can extract a sketch,
for example, and then modify it before creating a feature. |
|
Repair
Sketch. You can fix errors in a sketch so that the sketch can
be used to extrude or cut a feature. Typical errors can be overlapping
geometry, small gaps, or many small segments that are collected into a
single entity. |
|
Align
Sketch. Select an edge in one view to align to the edge selected
in a second view. The order of selection is important. |
|
Extrude.
Extrude a feature from the selected sketch entities. You do not have to
select a complete sketch. |
|
Cut.
Cut a feature from the selected sketch entities. You do not have to select
a complete sketch. |