End Treatment PropertyManager
Specify the following properties when you insert
an end treatment weld bead in a drawing.
Parameters
ANSI type 
.
Creates an end treatment in the ANSI standard.
ISO type 
. Creates
an end treatment in the ISO standard.
Bead leg length 1 (ANSI
type only) 
. Sets the length of the end treatment
for the first edge.
Bead leg length 2 (ANSI
type only) 
. If Equal
leg length is cleared, sets the length of the end treatment for
the second edge.
Bead throat thickness 
(ISO type
only). Defines the end treatment by setting the throat thickness.
Bead leg length 
(ISO type only). Defines the end treatment
by setting the leg length.
Edges 
. Displays
the weld bead or two edges that create the boundary for the end treatment.
You must select two adjacent edges. The symbol is placed at the intersection
of the edges.
Display dimensions. Shows the
Bead leg length or Bead
throat thickness values in the graphics area. Changes to the dimensions
change the symbol.
Use solid fill. Displays the
end treatment in a solid color. When cleared, the symbol gives a line
representation.
|
|
|
|
Selected |
Cleared |
Layer 
Applies the weld bead to the specified drawing layer.