Annotation Properties
Lets you select the types of annotations that you want to display and
set text scale and other annotations options.
To select the types of annotations to
display:
In the FeatureManager design tree, right-click
the Annotations folder 
and select Details.
Choose
from the options described below, then:
Display
filter. To specify the annotation types to display by default,
select Display all types, or clear
Display all types and select individual
types.
|
Cosmetic threads |
Shaded cosmetic
threads |
|
Datums |
Geometric tolerances |
|
Datum targets |
Notes |
|
Feature dimensions |
Surface finish |
|
Reference dimensions |
Welds |
|
DimXpert dimensions |
Display all types |
Text
scale (For part and assembly documents). When Always
display text at the same size is cleared, you can specify a scale
for the default size of annotation text.
Select from the following options:
Always
display text at the same size. When selected, all annotations and
dimensions are displayed at the same size regardless of zoom. Note that
drawings have this option disabled and always zoom the text height.
Display
items only in the view orientation in which they are created. When
selected, any annotation is displayed only when the model is viewed in
the same orientation as when the annotation was added. Rotating the part
or selecting a different view orientation removes the annotation from
the display.
Display
annotations / Display assembly annotations. When selected, all
annotation types that are selected in the Display
filter are displayed. For assemblies, this includes not only the
annotations that belong to the assembly, but also the annotations that
are displayed in the individual part documents.
Use
assembly setting for all components. When selected, the display
of all annotations matches the setting for the assembly document, regardless
of the setting in the individual part documents. Use this option along
with the Display assembly annotations
check box to display different combinations of annotations.
If
you use JIS dimensioning standards, specify the JIS
surface finish size (either 1,
2, or 3
Characters or Custom Scale).
If you select Custom Scale, specify
the scale value in the Scale box.