Hide Table of Contents

Insert Part

Use Insert Part to insert a base part into another part document. When you insert a part into another part:

  • The part you insert becomes a solid body.

  • If the inserted part contains mate references, you can use them to position the inserted part. A Body-Move/Copy feature is added to the FeatureManager design tree.

  • You can move and rotate the body after you place it.

To insert a part:

  1. With a part document open, click Insert Part (Features toolbar) or Insert, Part.

  2. Browse to a part document and click Open.

    The Insert Part PropertyManager appears.

  3. Under Transfer, select any combination of the following:

    • Solid bodies. Inserts the solid bodies.

    • Surface bodies. Transfers surfaces.

    • Axes. Transfers the axis information.

    • Planes. Transfers all planes from the original part.

    • Cosmetic threads. Transfers cosmetic threads.

    • Absorbed sketches. Inserts absorbed sketches from the inserted part.

    • Unabsorbed sketches. Inserts unabsorbed sketches from the inserted part.

    • Custom properties. Transfers all custom properties that have been defined for the inserted part.

    • Coordinate systems. Inserts the coordinate system of the inserted part into the derived part. You can use the coordinates of the two parts to create a mate by selecting Locate Part under Launch move dialog and aligning the axes of the coordinate systems.

    • Model dimensions. Imports model dimensions of the inserted part into the derived part.

    • Hole wizard data. Transfers data about the source part's Hole Wizard holes, so that the data is available in drawings of the derived part.

All transferred elements of the inserted part are placed in folders under the inserted part in the FeatureManager design tree.

  1. Under Locate Part, select Launch move dialog to define a location for the inserted part in the Locate Part PropertyManager.

  2. Optionally, if you want to independently edit the features of the inserted part without affecting the original part, under Link, click Break link to original part.

You can also break the link to the original part later by listing the derived part's external references and selecting Break All.

Once you break the link to the original, you cannot restore it.

  1. Click .

After you insert a part, you can move, copy, rotate, or mate it using Move/Copy Bodies (Features toolbar).

To change the configuration of the inserted part:

  1. Right-click the part and select List External Refs.

  2. Select a configuration in Configuration Name, and click OK.

You can also control the configuration with a design table. See Base Parts in Configurations.

Related Topics

Derived Parts


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

Subject:   Feedback on Help Topics
Page:   Insert Part
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:


We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again

Web Help Content Version: SOLIDWORKS 2011 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.