Hide Table of Contents

Walk-through PropertyManager

The Walk-through function lets you explore or create a video of the 3D geometry of machines, plants, equipment or other systems.

To display the PropertyManager, click View > Lights and Cameras > Add Walk-through.

Avatar Parameters

Vertical direction Displays the up direction. To change, click in the box and select an object to define the direction. A green arrow displays the direction.
  Flip Direction Reverses the up direction.
Viewing height Sets the height above the floor or motion path at which the camera is positioned.

Motion Constraints

Curves, planes, and planar faces to define floors and motion paths Defines constraints to limit motion through the system. You can define none, one, or several constraints. Select 2D or 3D sketches, grid feature, reference plane, planar face, or model edge. Use the Move Up and Move Down arrows to arrange the constraints.
  Turn avatar to follow paths Turns the camera to face the direction of travel. Clear the option to keep the camera facing the direction it was turned toward. You can, for instance, move the camera forward and have it record objects on one side of the path.
  Treat faces as infinite planes Allows camera movement beyond the edges of any face to which the camera is constrained.

Record/Playback

  Capture Walk-through Opens the Control Panel.
  Playback Walk-through Displays the walk-through.
  Generate Video Saves a video of the walk-through.

Control Panel

Use the navigation arrows to proceed with the walk-through. To capture a video at the same time, use the video controls to start and stop the camera. You can also use keyboard shortcuts as listed below.

Begins recording.
Pauses recording. Click again to resume recording.
Saves and returns to the PropertyManager. The Playback Walk-through and Generate Video buttons become available in the PropertyManager. Use the Playback Walk-through button to playback the videos you create. Click the Generate Video button to specify a location to save videos.
Cancels and returns to the PropertyManager.
  Points the camera look up, down, left, or right. The camera position does not change. Click the center to reset the view to the direction of travel.
  Zooms in.
  Zooms out.
  Turns the camera left.
  Turns the camera right.
  Moves the camera forward.
  Moves the camera back.
  Moves the camera left.
  Moves the camera right.
  Moves the camera down.
  Moves the camera up.
  Sets the speed for the camera movement.
  Locks or unlocks the camera to a constraint. Select a constraint by clicking the down arrow, or cycle through constraints by using the left and right arrows.
  Shows or hides the map window.
You can use mouse and arrow keys, or keyboard controls, to maneuver through the system. The keyboard controls are:
Arrows Move forward or back, turn left or right.
Shift + arrows Move up, down, left, or right.
Control + arrows Turn up or down.
Alt + arrows Look up, down, left, or right.
Home Reset “view” direction.
Z, Shift + Z Zoom out or in.
+, - Increase or decrease speed.
1 - 9 Set speed.
Scroll Lock Lock to constraint.
Page Up Next constraint.
Page Down Previous constraint.
R Record.
Space Pause.
Esc Cancel.
M Toggle map view.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Walk-through PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2011 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.