GOST Weld Symbol Properties
You can create GOST weld
symbols
in part, assembly, and drawing documents. Set the drafting standard in
Document
Properties - Drafting Standard to GOST.
Field.
Adds 
at the bend in the weld line to indicate that the
weld is applied in the field.
Around.
Creates a circle 
at the bend in the weld line to indicate
that the weld is applied all around the contour.
Other
Side. Move the arrow from the upper 
to the lower
side of the leader.
Leader
anchor. Anchor the leader to the specified location on the weld
symbol.
Use
multi jog leader. Allows you to click in the graphics area several
times to create bends for the leader.
Layer.
In a drawing with named layers, choose a layer from the list.
Solder.
Adds 
to the symbol leader.
Glue.
Adds 
to the symbol leader.
Weld Text. Type the weld dimensions
and specifications.
The box on the left contains the text that appears
on the bent leader; the other two boxes contain the text that appears
above and below the bent leader.
Place the cursor in the text box where you want
one of the following symbols and click the symbol button.
|
|
Fillet Weld |
|
Stagger Check |
|
|
Heat |
|
Not All Around |
|
|
Smooth |
|
Diameter |
|
|
Stagger Chain |
|
Number |
SF Symbol. To add surface finish
information to the symbol, under SF Symbol,
select Top or Bottom
to place the symbol above or below the horizontal leader. Enter the information
in the Surface
Finish Symbol dialog box, and click OK.
To modify the surface finish information, click Details
for the side you want to modify.
Font. To specify a font for
text and size of symbols, clear Use document
font and click Font.
Style
Related Topics
ANSI Weld Symbols
Weld Symbol Properties