Electrical Analogy of Heat Conduction
Heat conduction in solids is similar to the conduction of electricity
in electrical conductors in many aspects. In a conductor, the flow of
electricity is driven by a potential difference and so is the flow of
heat driven by a difference in temperature. In electric conduction, electric
charge is transported from one point in a conductor to another by the
motion of the electrons, in thermal conduction, heat is transported from
one point of a solid to another by the vibration of the molecules of the
solid due to their increased energy.
Heat conduction is governed by Fourier's law which states that: the
rate of heat transfer (Q) between two sufficiently close points in a medium
is proportional to the temperature difference between the two points (T1-T2)
divided by their separation (Dx)
and the area normal to the direction of heat flow (A). The constant of
proportionality is called the coefficient of thermal conductivity of the
material (k). Mathematically, this statement can be written as:
Q = k
A ( T1 - T2 )/Dx
where Q is the rate of heat transfer in Watts.
Electric current flow is governed by Ohm's law, which states that the
electric current (I) flowing between two points in a conductor equals
the potential difference between the two points (V1-V2) divided by the
electric resistance between them (R). Ohm's law can be written as:
I = ( V1
- V2 )/R
The above equations suggest that the following analogy holds:
|
Thermal Conduction |
Electric Conduction |
|
Heat flow rate: Q |
Electric current : I |
|
Temperature difference: DT
= T1 - T2 |
Potential difference : DV
= V1 - V2 |
|
Thermal resistance: Rthermal
= Dx/(kA) |
Electric resistance = R |
The next figure shows the analogy between the two phenomena.
