Get DimXpert Tolerance4 Example (C#)

This example builds a part to demonstrate usage of the SolidWorks Document Manager API for the following DimXpert annotations:

    *  Angle-between dimension tolerance

    *  Chamfer dimension tolerance

    *  Line Profile geometric tolerance

    *  Straightness geometric tolerance

//--------------------------------------------------------------------------

// 1. Open:

//    <SolidWorks_install_dir>\samples\tutorial\api\plate_tolstatus.sldprt

// 2. Open the DimXpert toolbar from View > Toolbars

//    (select the first instance of Toolbars on the View menu).

// 3. Create the chamfer dimension tolerance:

//    a. Click Auto-Dimension Scheme on the DimXpert tool bar.

//    b. Ensure that the Chamfer feature filter is selected.

//    c. Click the green arrow to accept the settings.

//    d. Observe ChamferDepth1 and ChamferDepth2

//       annotations in the DimXpert tree.

// 4. Create angle-between dimension tolerance:

//    a. Click Location Dimension on the DimXpert tool bar.

//    b. Click a face of the part.

//    c. Click a face perpendicular to the face selected

//       in step 2 (not the chamfer).

//    d. Click outside the part to place the annotation.

//    e. Find the following Dimxpert annotation in the

//       DimXpert tree: AngleBetween1.

// 5. Create line profile and straightness geometric tolerances:

//    a. Click  Geometric Tolerance on the DimXpert tool bar.

//       In the Geometric Tolerance Properties dialog:

//          i.   Select Straightness from the Symbol dropdown list.

//          ii.  In second row, select Line Profile from the Symbol

//               dropdown list.

//          iii. Type 0.25 in Tolerance1.

//          iv.  Click the top face of the part.

//          v.   Click outside the part to place the annotation.

//          vi.  Click OK to close the Geometric Tolerance

//               Properties dialog.

//    b. In the DimXpertManager tab of the Management Panel,

//       expand Plane7.

//    c. Observe the following Dimxpert annotations:  

//       LineProfile1 and Straightness1.

// 6. Close the part, saving it to another name.

//    NOTE: Because these parts are used in a

//          SolidWorks online tutorial, do not

//          save any changes to the original file name.

// 7. Read how to load and run Code_Example_CSharp with

//       this part.

//--------------------------------------------------------------------