Sets tolerances for DFMXpress design rules.
To display rule parameters, click Settings from the DFMXpress pane.
| Manufacturing Process |
Specifies the manufacturing process for which to set rule parameters. Choose one: - Mill/Drill only
- Rules for milling and drilling.
- Turn with Mill Drill
- The milling and drilling rules and additional rules for turned parts.
- Sheet metal
- Rules for sheet metal parts.
- Injection Molding
- Rules for injection molded parts.
Standard hole sizes apply to all manufacturing processes.
|
| Rule Parameters |
Lists the parameters for your Manufacturing Process selection.
|
| Standard Hole Sizes |
Defines standard hole sizes used by DFMXpress. Click Edit to display the Standard Hole Sizes dialog box. |
| Restore Default Values |
Resets the rule parameters to the default values. Available only if you have changed at least one parameter value. |
Mill/Drill Parameters
Available when Manufacturing Process is Mill/Drill only.
Turn Parameters
Available when Manufacturing Process is Turn with Mill Drill.
Sheet Metal Parameters
Available when Manufacturing Process is Sheet metal.
| Hole Diameter to Thickness Ratio |
Accepts a value between 0.01 and 100000. See Hole Diameters.
|
| Simple Hole-Part Edge Distance to Thickness Ratio |
Accepts a value between 0.01 and 100000. See Hole-to-Edge Distances.
|
| Countersink-Part Edge Distance to Thickness Ratio |
Accepts a value between 0.01 and 100000. See Hole-to-Edge Distances.
|
| Simple Hole Spacing to Thickness Ratio |
Accepts a value between 0.01 and 100000. See Hole Spacing.
|
| Countersink Spacing to Thickness Ratio |
Accepts a value between 0.01 and 100000. See Hole Spacing.
|
| Recommended Bend Radius |
Accepts a value between 0.01 and 100000 mm. See Bend Radii.
|
Injection Molding Parameters
Available when Manufacturing Process is Injection Molding.