From-To List Fields
The from-to list contains the following fields.
|
Field
|
Description
|
|
From Ref
|
The reference name for the first component to which the wire is connected, such as motor1 or con3.
When you use Insert Component  to place the components after data import, the placed component is automatically renamed to this reference.
|
|
From Part
|
The part number of the connector for this component reference, such as db9-plug or 5pindin-plug.
The value in this field must match a value in the Part number field in the Component Library, to cross-reference to a SolidWorks part document for the component.
|
|
From Pin
|
The pin number/name to which the wire is connected. This field is for information only; the value is not used by the software.
|
|
Other
|
Header names for user-defined attributes.
|
|
To Ref
|
The reference name for the second component to which the wire is connected, such as motor1 or con3.
|
|
To Part
|
The part number of the connector for this component reference, such as db9-plug or 5pindin-plug.
The value in this field must match a value in the Part number field in the Component Library, to cross-reference to a SolidWorks part document for the component.
|
|
To Pin
|
The pin number/name to which the wire is connected. This field is for information only; the value is not used by the software.
|
|
Wire Color
|
(for future use)
|
|
Cable Name
|
If this wire is a core in a cable, the name of the cable. Leave blank for individual wires.
|
|
Wire Name
|
A descriptive identifier for the wire, such as T2 Signal or GND1. This field is for information only; the value is not used by the software.
|
|
Wire/Cable Spec
|
The part number of the wire or cable.
The value in this field must match the value in the Part number field in the Cable/Wire Library.
|
|
Core Identifier
|
If this wire is a core in a cable, the name of the core in the cable. Leave blank for individual wires.
The value in this field must match a value in the Wire name field in the Cable/Wire Library.
|