İçindekiler'i Gizle

P&ID File Format

You can import a Piping and Instrumentation Diagram (P&ID) from a specially formatted .xml file and use that file as a guide in building route assemblies. The .xml file specifies each piece of equipment and pipe system to include in the routing assembly, and must adhere to the SolidWorks P&ID file format.
To view an example of the P&ID file format, double-click the sample P&ID xml file from the following location in C:\ProgramData or C:\Documents and Settings\All Users\Application Data, depending on your operating system:
SolidWorks\SolidWorks version\design library\routing\piping\pnid sample version.xml

P&ID Data

Attribute string values are optional unless otherwise noted. Required values and elements are indicated by *.
Element Attribute Element or Attribute Description
<PnIDData>*   Specifies the container element that starts all P&ID files.
Requires the closing element </PnIDData>.
<version> value Defines a string value for the P&ID file version.
<SystemInfo>*   Specifies a container for elements describing the piping and instrumentation system.
Requires the closing element </SystemInfo>.
<Description>* value* Defines a string value that describes the piping and instrumentation system.
The description appears in the tree view of a P&ID validation report.
<Comment> value Defines a string value for a comment about the P&ID file.
<EquipmentReferenced>*   Specifies the container element for all <Equipment> elements in the piping and instrumentation system.
Requires the closing element </EquipmentReferenced>.
<PipelineInfo>   Specifies a container element for pipe fittings and connections.
Requires the closing element </PipelineInfo>.
You can define multiple elements to model multiple pipelines in the routing assembly, but you cannot assign two pipelines with the same tag in separate routing assemblies.
<Description> value Defines a string value that describes the piping system.
<Comment> value Defines a string value for a comment about the piping system.
<Name>* value* Defines a string value for the name of the piping system.
<Tag>* value* Defines a unique string value for the piping system tag.
This value appears in the Piping and Instrumentation tab of the Task Pane.
<In-lineFittings>*   Specifies a container element for pipe fittings defined in <Fitting> elements.
Requires the closing element </In-lineFittings>.
<Connections>*   Specifies a container element for pipe connections defined in <PipeSegment> elements.
Requires the closing element </Connections>.

Equipment and Fittings

Attribute string values are optional unless otherwise noted.
Element Attribute Element or Attribute Description
<Equipment> * or <Fitting>*   Specifies the container element for a piece of equipment or fitting in the piping and instrumentation system.
Requires the appropriate closing element.
<ID>* value* Defines a unique string value that identifies the piece of equipment or fitting.
<Tag>* value* Defines a unique string value for the equipment or fitting tag.
This value appears in the Piping and Instrumentation tab of the Task Pane.
<Description> value Defines a string value that describes the piece of equipment or fitting.
<PartNumber> value Defines a string value for a SolidWorks part number for the piece of equipment or fitting.
If you do not assign a part number, you can specify the library search with the <Type>, <SubType>, <Size>, and <Specification> elements.
<Config> value Defines a string value for the SolidWorks part configuration for the piece of equipment or fitting.
<Area> value Defines a string value for the equipment or fitting Area subtag.
<Type> value Defines a string value for the component type, for example, "tee" or "reducer".
If you do not assign a <Type> value, you are prompted to search for the file when the Select Component dialog box appears.
<SubType> value For valve part types, defines a string value for the subtype, for example, "gate" or "globe".
<System> value Defines a string value for the equipment System subtag, which assigns a name to the routing subsystem to which the piece of equipment or fitting belongs.
<Size> value Defines a string value for the equipment or fitting Size subtag, which specifies the nominal size. The size aids the database search when you do not specify the part number and configuration.
<Specification> value Defines a string value for the Specification subtag.
<Custom>  
Specifies the container element for custom attributes and values. Include the <CustomAttribute> element within the <Custom> element.
Custom attribute values provide metadata, but are not referenced when you create the routing assembly from the P&ID file.

For example, to define a custom attribute width with the value 1.345 for a pipe segment, include the following in the <PipeSegment> element: <Custom> <CustomAttribute name="width" value="1.345"/> </Custom>.
<CustomAttribute> name Defines a string for the name of the custom attribute.
value Defines a string value for the custom attribute.

PipeSegment

Element Attribute Element or Attribute Description
<PipeSegment>*   Specifies the container element for a pipe segment in the piping and instrumentation system.
Requires the closing element </PipeSegment>.
<ID>* value* Defines a unique string value that identifies the pipe segment.
<Tag>* v*alue Defines a unique string value for the pipe segment tag.
<Diameter> value Defines a string value for the pipe diameter. This value is interpreted in inches.
<FromEquip>* value* Defines a string that matches the <tag> value of the equipment from where the pipe segment is routed.
You can reference tag values for any <Equipment> element and to any <Fitting> elements specified within the same <PipelineInfo> element.
<FromEquipPort>* value* Defines a string value for an equipment port from which the pipe segment is routed.
<FromEquipSize> value Defines a string value for the size of the equipment from which the pipe segment is routed.
<ToEquip>* value* Defines a string that matches the <tag> value of the equipment to where the pipe segment is routed.
You can reference tag values for any <Equipment> element and to any <Fitting> elements specified within the same <PipelineInfo> element.
<ToEquipPort>* value* Defines a string value for an equipment connection point port ID to which the pipe segment is routed.
<ToEquipSize> * value* Defines a string value for the size of the equipment to which the pipe segment is routed.
<Area> value Defines a string value for the pipe segment Area subtag.
<System> value Defines a string value for the pipe segment System subtag, which assigns a name to the routing subsystem to which the pipe segment belongs.
<Size> value Defines a string value for the pipe segment Size subtag, which specifies the nominal size.
<Fluid> value Defines a string value for the pipe segment Fluid subtag, which specifies the type of fluid transported through the pipe segment, such as oil or water.
<PhaseState> value Defines a string value for the pipe segment Phase State subtag, which specifies the physical phase of the material transported through the pipe segment. Assign one of the following values:
Solid
Liquid
Gas
<Insulation> value Defines a string value for the pipe segment Insulation subtag.
<Identifier> value Defines a string value for the pipe segment Identifier subtag.
Enter a unique value for the Identifier subtag to ensure that each pipe segment tag defined from your tag scheme is unique.
<Custom>  
Specifies the container element for custom attributes and values. Include the <CustomAttribute> element within the <Custom> element.
Custom attribute values provide metadata, but are not referenced when you create the routing assembly from the P&ID file.
<CustomAttribute> name Defines a string for the name of the custom attribute.
value Defines a string value for the custom attribute.


Bu başlık hakkında geribildirimde bulunun

SOLIDWORKS; dokümantasyonun sunumu, doğruluğu ve bütünlüğü hakkında geribildiriminizi almaktan memnuniyet duyar. Bu başlık ile ilgili yorum ve önerilerinizi, aşağıdaki formu kullanarak doğrudan dokümantasyon takımımıza yollayın. Dokümantasyon takımı teknik destek sorularına yanıt veremez. Teknik destek ile ilgili bilgiler için buraya tıklayın.

* Gerekli

 
*Email:  
Konu:   Yardım Başlıkları Hakkında Geribildirim
Sayfa:   P&ID File Format
*Yorum:  
*   Kişisel Bilgilerimin Dassault Systèmes tarafından kullanılacağının belirtildiği gizlilik politikasını okuduğumu ve kabul ettiğimi onaylıyorum

Yazdırma Başlığı

Yazdırılacak içeriğin kapsamını seçin:

x

Internet Explorer 7'den daha eski bir tarayıcı sürümünü kullandığınızı tespit ettik. Optimize edilmiş görünüm için tarayıcınızı Internet Explorer 7 veya daha yenisine yükseltmenizi öneririz.

 Bu mesajı bir daha asla gösterme
x

Web Yardım İçerik Sürümü: SOLIDWORKS 2012 SP05

SOLIDWORKS içindeki Web yardımını devre dışı bırakmak ve onun yerine yerel yardımı kullanmak için Yardım > SOLIDWORKS Web Yardımını Kullan öğelerine tıklayın.

Web yardımı arabirimi ve araması ile ilgili karşılaştığınız sorunları lütfen yerel destek temsilcinize bildirin. Yardım başlıkları hakkında ayrı ayrı geri bildirimde bulunmak için ilgili başlığın sayfasından "Bu başlık hakkında geribildirim" bağlantısına tıklayın.

0.20.21