The Large Design Review tab of the CommandManager provides access to commands you can use when you open an assembly in Large Design Review mode.
To open an assembly in Large Design Review mode, click Open 
(Standard toolbar) or . In the dialog box, in Mode, select Large Design Review.
 |
Add Walk-through |
Lets you explore the assembly and create and save videos of what you see as you maneuver through it. |
 |
Section View |
Displays the model as if cut by planes that you specify. You can select one or more of the three standard planes to section the model. |
 |
Measure |
Measures distance between vertices, edges, and faces in the assembly. |
 |
Take Snapshot |
Captures the state of the graphics area, similar to a custom named view, and saves it in a Snap feature on the DisplayManager tab  of the Manager Pane. Unlike a custom named view, if some parts are hidden when you take a snapshot, those parts are always hidden when you return to that snapshot. |
 |
Selective Open |
Lets you select components to fully load. Other components are not loaded and become hidden. The software exits Large Design Review. |
 |
Selective Open in Lightweight |
Lets you select components to load lightweight. Other components are not loaded and become hidden. The software exits Large Design Review. |
 |
Set All to Resolved |
Fully loads all components and exits Large Design Review. |
 |
Set All to Lightweight |
Loads all components lightweight and exits Large Design Review. |
 |
Değiştirilmiş Bileşenleri Filtrele |
Değiştirilmemiş bileşenlerin şeffaflığını ayarlamanıza imkan tanır. Değiştirilmiş Bileşenleri Filtrele açıldığında, ve bir bileşeni farklı bir pencerede açıp kaydettiğinizde, değiştirilmiş bileşen montaj penceresinde mat olarak görünür, değişmemiş bileşenler ise şeffaf kalır.
Değiştirilmiş Bileşenleri Filtrele seçeneği yalnızca bir veya daha fazla bileşen değiştirildiğinde kullanılabilir.
|
 |
AssemblyXpert |
Reports assembly statistics such as number and type of components, depth of the assembly hierarchy, etc. (AssemblyXpert diagnostic tests are not available in Large Design Review.) |
 |
Options |
Provides access to the System Options tab of the the Options dialog box. (The Document Properties tab is not available in Large Design Review.) |