Hide Table of Contents

List Strain

Lists components of element's strains.

Component

  • Component . Sets the strains component to be searched for extreme values. The default is to list values within 5% tolerance of the Absolute Max value. Click here for available strain components for listing. Not all components are available for all study types.

  • Step Number. Sets the step number at which the selected result is to be listed. Available only for nonlinear, modal time history and drop test studies.

Advanced Options

  • Plane, Axis or Coordinate System . Select a reference plane, an axis, or a coordinate system to list strain. Used for directional components only.

  • Element's center. Lists strains at element's centers.

  • Shell Face . For shell and mixed mesh models only.

    • Top. Total strains at the top face.

    • Bottom. Total strains at the bottom face.

    • Membrane. Membrane strain component.

    • Bending. Bending strain component.

  • Extremes . Select this option to search for extreme values.

    • Criterion . Sets the criterion for extreme results. Available list options are: Absolute Max, Algebraic Max, and Algebraic Min.

    • Sort by value. If checked, activates the sorting of the list.

    • List all values within. Sets the range of values to be listed. The default is to list values within 5% tolerance of the extreme value.

  • Range . Select this box to specify the desired range of elements to be searched. Use this option to list values sequentially with element numbers. Enter the lowest and the highest element numbers.

List Set

Sets the strain component to be listed. Available only if Range is selected under Advanced Options.

  • Strain components. Lists the normal and shear strain components.

  • Strain energy and total energy. Lists the strain energy density and total strain energy

  • Principal components and equivalent strain. Lists the principal strain components and equivalent strain.

To list a strain component with respect to a selected reference geometry:

  1. If needed, create the reference entity you want to use to list the desired strain component.

  2. Click Simulation, List Results, Strain.

The List Results PropertyManager opens.

  1. Under Quantity, select Strain.

  2. Select the strain component to list in Component.

  3. In the FeatureManager design tree, select the reference entity you created in step 1.

Make sure that the reference entity you selected appears in the Plane, Axis or Coordinate System box under Advanced Options.

  1. Set the rest of the list options and click OK.

The List Results dialog box opens and a list of the selected strain component appears.

  1. Click Save.

The Save As dialog box opens. You can save the list to an Excel file (*.csv) or as a plain text file (*.txt).

  1. Click Close.

Related Topic

Listing Results



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   List Strain
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2012 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.21