Hide Table of Contents

Applying a Remote Displacement (Rigid Connection) to a Face

To apply a remote displacement (Rigid connection) to a face:

  1. In the Simulation study tree, right-click the External Loads icon_external_loads.gif icon and select Remote Load/Mass PM_remote_load-mass.gif.
  2. Under Type, select Displacement (Rigid connection).
  3. In the graphics area, click the faces to which you want to apply the remote displacement.
  4. Under Reference Coordinate System, select Global (default global coordinate system), or User defined.

    For User defined, click inside Select a Coordinate System PM_force_coordinate_system.gif, then select a coordinate system from the flyout FeatureManager tree.

  5. Under Location, do the following:
    1. Select the desired Unit for length PM_units.gif.
    2. Type the coordinates of the point of application of the remote force in the X-Location PM_remote_load_x_location.gif, Y-Location PM_remote_load_y_location.gif, and Z-Location boxes PM_remote_load_z_location.gif.
  6. Under Translation, do the following:
    1. Set Unit PM_units.gif to the desired unit of length.
    2. Click the translation components that you want to specify and type in their values.
  7. Under Rotation, do the following:
    1. Set Unit PM_units.gif to the desired unit of rotation.
    2. Click the rotation components that you want to specify and type in their values.
  8. Click PM_OK.gif.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Applying a Remote Displacement (Rigid Connection) to a Face
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2012 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

10.20.4