Extrude Features
The Extrude PropertyManager defines the characteristics of extruded features. You can create these types of extruded features:

|
-
You can also use Instant3D and RapidSketch to create extrudes.
-
When you create an extrude of a slot sketch, you can view the slot's central temporary axis. This capability is particularly useful for mating fasteners at the center of slots in assemblies.

|
You can also use Instant3D and RapidSketch to create extrudes.
To create an extrude feature:
-
Create a sketch.
-
Click one of the extrude tools:
-
Extruded Boss/Base
on the Features toolbar, or click Insert, Boss/Base, Extrude
-
Extruded Cut
on the Features toolbar, or click Insert, Cut, Extrude
-
Extruded Surface
on the Surfaces toolbar, or click Insert, Surface, Extrude
-
Set the PropertyManager options.
To extrude in both directions from the sketch plane, set the PropertyManager options in Direction 1 and Direction 2. To extrude as a thin feature, set the PropertyManager options in Thin Feature. When you drag the manipulator to set the size, an
Instant3D ruler
appears so you can set precise values.
-
Click
.