Use the Outline Properties panel to view and edit outline properties.
From the tree view, expand the desired outline node (such as
Component Keep-Out Areas), then right-click the outline and select
Properties.
Not all outline types have the same properties. For example, some keep-out and keep-in areas are 2D rather than 3D so do not have heights.
| Name |
The outline name. |
| Owner |
Not supported by all ECAD systems. Ignored by CircuitWorks (CircuitWorks can modify properties regardless of this property value), but you can change the value when exporting IDF data:
-
MCAD - Can only be modified in the MCAD system.
- ECAD - Can only be modified in the ECAD system.
- Unowned - Can be modified in either system.
|
| Board Side (some outline types only) |
Select Top or Bottom to change the location of the outline. |
| Routing Layers (routing outlines only) |
Select Top, Bottom, Both, Inner, or All. |
| Height (3D outline types only) |
The outline height. |
| Filter Status |
The filter status: Filtered In or Filtered Out. |