Linearized Buckling Analysis
Slender models tend to buckle under axial loading. Buckling is defined as the sudden deformation which occurs when the stored membrane (axial) energy is converted into bending energy with no change in the externally applied loads. Mathematically, when buckling occurs, the stiffness becomes singular. The Linearized buckling approach, used here, solves an eigenvalue problem to estimate the critical buckling factors and the associated buckling mode shapes.
A model can buckle in different shapes under different levels of loading. The shape the model takes while buckling is called the buckling mode shape and the loading is called the critical or buckling load. Buckling analysis calculates a number of modes as requested in the
Buckling
dialog. Designers are usually interested in the lowest mode (mode 1) because it is associated with the lowest critical load. When buckling is the critical design factor, calculating multiple buckling modes helps in locating the weak areas of the model. The mode shapes can help you modify the model or the support system to prevent buckling in a certain mode.
A more vigorous approach to study the behavior of models at and beyond buckling requires the use of nonlinear design analysis codes.
When to Use Buckling Analysis
Slender parts and assemblies with slender components that are loaded in the axial direction buckle under relatively small axial loads. Such structures can fail due to buckling while the stresses are far below critical levels. For such structures, the buckling load becomes a critical design factor. Buckling analysis is usually not required for bulky structures as failure occurs earlier due to high stresses.
Related Topics
Buckling Load Factor
Performing Buckling Analysis