The Edge Weld Results PropertyManager lists the weld sizes and forces of all edge weld connectors in the active document.
To display this PropertyManager, run a static study with edge weld connectors. Right-click Results 
and click List Weld Results.
Selection
| Unit |
 |
Sets the unit system for the edge weld results. |
| Type |
|
Selects the connector to list its results. |
| |
|
Results list the min, max, and mean values along the weld seam and they are given per unit weld length:
- Weld Size
- Weld Throat Size
- Joint Normal Force
- Shear-Weld Axis Force
- Shear-Surface Normal Force
For thin shell formulation, no shear deformation is calculated for shells and the edge weld results show zero values
for Shear-Surface Normal force.
For thick shell formulation, the Shear-Surface Normal force is calculated.
- Bending Moment
|
| |
|
Only for edge welds sized with European Standards, the maximum stress values along the weld seam are reported under Stress Values at Critical Location:
- Sigma perpendicular is the normal stress perpendicular to the throat
- Tau perpendicular is the shear stress (in the plane of the throat) perpendicular to the axis of the weld
- Tau parallel is the shear stress (in the plane of the throat) parallel to the axis of the weld
|
Positive joint normal forces indicate that the top face of the terminated shell is in compression. See topic
Edge Weld Definitions for descriptions of the edge weld forces.