Hide Table of Contents

Probing Result Plots

In many cases, you may want to know the numerical value of the plotted field at a particular location. Use the probe tool to display the numerical value of the plotted field at the closest node or element's center to the selected model location. You can graph the results or save them to a file.

  1. Activate the desired plot.
  2. Right-click the plot in the Simulation study tree and click Probe .
  3. In the PropertyManager, under Options, select one of the following:
    Option Description
    At Location Select locations on the model
    From Sensors Select a sensor name from Sensor List. You must first define sensors before this option becomes active.
    When probing results from sensor locations defined at coordinates, the location of the nearest node is used instead of the exact location of the sensor.
    On selected entities Select entities for Faces, Edges, Vertices . Click Update.

    View the results in the graphics area and under Results in the PropertyManager.

  4. Under Report Options, you can do the following:
    Option Description
    Click Save as Sensor Select nodes listed under Results to create a sensor list
    Click Save Save the probe results to a comma delimited *.csv file. Use a text editor or Microsoft Excel to view this file.
    Click Plot Generate a 2D graph of the results
  5. Under Annotations, select which annotations for the probe results are visible in the graphics area.

    You can also probe section plots on the faces cut by a section plane. The software uses linear interpolation to calculate the value. Create a section plot of the desired result on the undeformed shape of the model.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Probing Result Plots
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.