Hide Table of Contents

Hole Series Overview

You can use hole series to create a series of holes through the individual parts of an assembly.

The hole series is an assembly feature which creates hole features in the components of the assembly. You can create new holes or use existing holes. A hole series extends through each unsuppressed component in the assembly that intersects the axis of the hole (the components do not have to touch).

You can specify the end of the hole series under End Component in the Hole Series (Last Part) PropertyManager. Unlike other assembly features, the holes are contained in the individual parts as externally referenced features. If you edit a hole series within an assembly, the individual parts are modified.

  • If you add new components between the start and end components after you create the hole series, you can choose to include the new components in the hole series. You must edit the hole series to update it.
  • The depth of each hole within each component is measured from the entry face of the component to the end of the hole in the component. The depth displayed represents the actual depth of the hole in each component, resulting in accurate production drawings.

  • Hole series previews specify individual components of the hole series. Smart Fastener components also highlight. For example, when focus is on the Last Part tab, the last part highlights in the graphics area.

  • You cannot use hole series on assembly components which are multiple instances of the same part, unless each instance is a separate configuration of the part.
  • You cannot edit the parameters of a hole series hole in an individual part (unless you underive the feature). However, you can delete or suppress the hole. To edit the parameters of the hole in context of the assembly, go to the assembly and edit the hole series.

    If you underive the hole series hole in an individual part it becomes a Hole Wizard hole with no reference to the assembly.

  • You cannot create a hole series feature containing holes that affect different stacks of components. For example, two separate hole series features are required to define the holes in this assembly:

Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

Subject:   Feedback on Help Topics
Page:   Hole Series Overview
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:


We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.