Hide Table of Contents

Using DimXpert

Use a suite of DimXpert tools to insert dimensions and tolerances manually or automatically.

The DimXpertManager:

  • Lists the tolerance features defined by the DimXpert by feature.
  • Displays DimXpert tools.

To change the tree display, right-click the part name in the DimXpertManager, select Tree Display, and select a display option.

To use DimXpert for parts:

  1. Open a part to dimension using DimXpert.
  2. Set the DimXpert options. Click Tools > Options > Document Properties, and set the various DimXpert options, such as Geometric Tolerance.
  3. Insert dimensions and geometric tolerances manually or automatically.
    Option Description
    To manually insert dimensions and geometric tolerances:
    1. Set the datums using the Datum tool.
    2. Add tolerances and dimensions using the DimXpert tools, such as Size Dimension , Location Dimension , Pattern Feature , and Geometric Tolerance .
      Use the feature selector to define the feature types.
    3. Click Show Tolerance Status to see which features are under or over constrained for size and location.
    4. Apply additional dimensions and tolerances as needed to fully constrain the part.
      To set the color of DimXpert dimensions, click Options Tool_Options_Standard.gif > System Options > Colors. Under Color scheme settings, select Annotations > DimXpert.
    To automatically insert dimensions and geometric tolerances:
    1. Click Auto Dimension Scheme (DimXpert toolbar) or Tools > DimXpert > Auto Dimension Scheme.
    2. Set the PropertyManager options.
    3. Click .
  4. Save the part.

Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

Subject:   Feedback on Help Topics
Page:   Using DimXpert
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:


We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.