Hide Table of Contents

Customizing Parts with Part Numbers: Exporting and Importing a Configuration List

To assign part numbers to your Toolbox parts, you can export a configuration list to a Microsoft® Excel file, type part numbers in the file, and then import the edited file into SolidWorks Toolbox.

To export and import a configuration list:

  1. From Windows, click Start > All Programs > SolidWorks version > SolidWorks Tools > Toolbox Settings .
  2. Click 2 - Customize Your Hardware.
  3. On the Customize Hardware page, select an individual component.
  4. At the upper right of the configuration list, click Import/Export and click Export Data.
  5. Select a location for the spreadsheet file and click OK.
  6. In Microsoft Excel, open the spreadsheet.
  7. In the row for each configuration, type part numbers, descriptions, and comments in the appropriate columns.

    Important: Do not change other values or add columns. The other property values must not change for the import to succeed.

  8. Save and close the spreadsheet.
  9. In Toolbox, on the Customize Hardware page, click Import/Export and click Import Data.
  10. Browse to the spreadsheet file and click OK.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Customizing Parts with Part Numbers: Exporting and Importing a Configuration List
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.21