Hide Table of Contents

Unfold/Fold

With the Unfold and Fold tools, you can flatten and bend one, more than one, or all of the bends in a sheet metal part.

For faster system performance, unfold and fold only the bends that you need for the task that you are performing.
This combination is useful when adding a cut across a bend. First, add an Unfold feature to flatten the bend. Next, add your cut. Lastly, add a Fold feature to return the bend to its folded state.
Original part unfold_fold1.png
One bend is unfolded unfold_fold2.png
Cut through the unfolded bend unfold_fold3.png
Bend is folded back up unfold_fold4.png

Unfolding Bends

To add an unfold feature:

  1. In a sheet metal part, click Unfold Tool_Unfold_Sheet_Metal.gif on the Sheet Metal toolbar, or click Insert > Sheet Metal > Unfold.
  2. In the graphics area, select a face that does not move as a result of the feature for Fixed face PM_shm_Fixed_Face.gif.
    unfold1.png
  3. Select one or more bends as the Bends to unfold PM_shm_Bends_to_Unfold.gif, or click Collect All Bends to select all the appropriate bends in the part.
    unfold2.png
  4. Click PM_OK.gif.

    The selected bends unfold.
    unfold_fold3.png

Folding Bends

To add a fold feature:

  1. In a sheet metal part, click Fold Tool_Fold_Sheet_Metal.gif on the Sheet Metal toolbar, or click Insert > Sheet Metal > Fold.
  2. In the graphics area, select a face that does not move as a result of the feature for Fixed face PM_shm_Fixed_Face.gif.
    fold1.png
  3. Select one or more bends as the Bends to fold PM_shm_Bends_to_Fold.gif, or click Collect All Bends to select all the appropriate bends in the part.
    fold2.png
  4. Click PM_OK.gif.

    The selected bends fold.
    unfold_fold4.png



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Unfold/Fold
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.29